Logica CARTESIO
2Pages

LOGICA CARTESIO SERIE LOGICA FLEXIBLE SERIE LOGICA FLEXIBLE LOGICA CARTESIO PrintingCenter TECHNICAL FEATURES LOGICA CARTESIO PrintinCenter allow the most complex decoration of 3D large sized objects with multiple prints on its entire surface. LOGICA CARTESIO PrintinCenter is available in three different sizes: S (small), M-MK2 (medium) and L (large). With LOGICA CARTESIO PrintinCenter TOSH reaches the maximum operational flexibility. All mechanical movements are motorized via numerical control and guarantee high precision, providing complete flexibility of operation and simplicity without compromise. LOGICA CARTESIO PrintinCenter is available with 5 or 6 numerically controlled axis (on demand). There are 4 axis to move the pads and 1 or 2 axis to move the object, plus an extra axis to aid in the loading/unloading operation. LOGICA CARTESIO PrintinCenter comes equipped with an interchangeable plate for cliché support where it is possible to mix with high freedom large and small clichés (and large and small ink cups). Programming the printing cycle is extremely easy and doesn’t require highly qualified operator because every single axis can be moved also in manual mode, automatically memorizing the positioning both for pads and object. Operator interface is a large colour LCD touch screen panel. Maximum quality components, chosen from primary worldwide manufacturers are guaranteed in the construction of the machine. An exclusive feature of LOGICA CARTESIO PrintinCenter is to have all the pads radially disposed on a drum. The initial positioning of the pads is not critical because it is possible through the standard software to freely position the pads in relation to the clichés and the object. Moreover, for the same reason image lay-out on the clichés is non-critical and highly flexible. Numerically controlled pad printing center. The machine is normally available with hermetic ink cups but on request it can be equipped with traditional open ink blading system. Production changeover on LOGICA CARTESIO PrintinCenter is extremely fast (only a few minutes for 15 pads and 10 colours) thanks to the possibility to interchange the complete pad drum and the complete cliché’ support plate (including ink cups) with others already prepared and recalling a pre-memorized program. Extremely high quality multi-colours printing on sophisticated 3D objects. LOGICA CARTESIO PrintinCenter output depends on the number of prints on the object. Typically it can range from 150 pieces/hour for 15-20 prints around the object up to 500 pieces/hour for more simple decoration lay out. LOGICA CARTESIO PrintingCenter allow the most complex decoration of 3D large sized objects with multiple prints on its entire surface. LOGICA CARTESIO PrintingCenter is available in three different sizes: S (small), M-MK2 (medium) and L (large). LOGICA CARTESIO PrintingCenter is equipped with an automatic pad cleaning device and hot air pads pre-drying device with built-in pump. With LOGICA CARTESIO PrintingCenter Tosh reaches the maximum operational flexibility. LOGICA CARTESIO PrintinCenter can be equipped (optional) with an air treatment device to maintain constant settable temperature inside the plant, this system also provide antibacterial air filtration to avoid dust inside the machine. LOGICA CARTESIO PrintinCenter is a environmentally friendly machine especially when equipped with hermetic ink cups as there is almost no solvent evaporation. GRAFICA TOSH - Printed 03/14 BECAUSE OF CONTINUOUS IMPROVEMENT, WE RESERVE THE RIGHT TO CHANGE SPECIFICATION, DESIGN MATERIALS WITHOUT NOTICE. TOSH S.r.l. - Via Lambro 84, I - 20089 Quinto Stampi Rozzano (MI) Tel. +39 02 57566.1 (10 linee r.a.) - Fax +39 02 89200266 E-mail: info@tosh.it www.tosh.it Extremely high operational flexibility for high quality. LOGICA CARTESIO PrintinCenter can be supplied also in a mirrored version so placing two machines side by side they can be managed by a single operator. On the 12 spokes of the pad drum it is possible to place the pads naturally in different sizes in relation to the requested artwork. Each spoke can accept more than one pad. Object loading/unloading may be done manually with the operator or automatically with a robot/manipulator, in this last case it is possible to have in line an automatic vision system to check the printing quality (optional). LOGICA CARTESIO PrintinCenter size M-MK” and L are equipped on the two main axis with high speed, latest technology, linear motors. Logica Cartesio Printing

LOGICA CARTESIO VERSIONE |Q9/13| LOGICA CARTESIO TECHNICAL DATA