SERIE LOGICA FLEXIBLE LOGICA 07 Numerically controlled pad printing centre for multicolour printing, on medium and large sized objects Up to 6 movement axis easily programming 5 6 7 8 colours colours colours colours Fully electrical operation CHARACTERISTICS • All the mechanical movements are motorized via numerical control and lead screw, guarantee high precision and smooth working. • Manufactured from light alloy and special steel. The simple and robust construction was also conceived to guarantee a long life of working without maintenance. • The computerized numerical control ensures complete flexibility of operation and simplicity without compromise. • Setting up adjustments can be carried out via the numeric keyboard with alphanumeric display. Ability to freely position the keyboard, where most comfortable for the user. • Memory of all different work programs for easy changeover set up. • Automatic colours registering on x y r axes, for immediate start-up (optional). • Ability to print under the printing plate, allowing decoration in every position on the large sized objects. • Ability to print on different surface levels of the same object, adjusting easily the stroke through the keyboard. • Low power consumption, economical since compressed air is not required. It’s exclusive electric operation presents a considerable advantage compared to an equivalent pneumatic machine, a saving of more than 5000 kw in a year can be achieved assuming one working shift per day. • Eco-friendly. Due to its available hermetic ink system preventing solvent evaporation. • Fully interchangeability between the two systems open and hermetic. • Changeover time reduced to a few minutes, thanks to the considerations given in the design concept to apply ergonomic principles to the system. • Exclusive doctoring speeds control system directly through the keyboard. • Ergonomic design to easy access all mechanical parts. • Accurate movement of the support slide-table with adjustable height. Logica 07 5 colours with indexer Mod. ERN1370, cross table mod. TO200, 4’ rotary axes and safety guard. TECHNICAL DATA • Operation: electric with numerical control • X axes pads register: +/- 40 mm • Maximum printing speed: adjustable up to 1200 c/h (*) • AC supply: 380 V - triple phase - 50/60 Hz • Average consumption and weight (basic model): 1,3 KW - about 1500 Kg • Standard ink cup sizes: 5 colours dia. 250 mm 6 colours dia. 195 mm 7 colours dia. 160 mm 8 colours dia. 130 mm or mixed (*) The above mentioned printing speed is the max achievable and will reduce when the vertical pad stroke is increased or when delay times have been programmed into the cycle. The maximum pri

SERIE LOGICA FLEXIBLE OPTIONAL STANDARD PACKAGES To make the choice easier, Tosh proposes a series of standard packages, between the machine Cross tables and the conveying systems, that suits your specific application. Recommended for applications where there is a single fixture, they allow rapid alignment on more axis of the part to the print. Among the suggested and more popular, there are: • Cross Table in different dimensions • Numerically controlled indexers with programmable and adjustable Indexers Single fixture linear transfers for multicolour printing on medium and large products. pitch...