Overview: This document provides detailed technical specifications for the Pads HP series07, a range of printing pads used in industrial printing applications. Each pad type is identified by a unique code and ID, with dimensions and rubber sizes specified.

1. Specifications

The document lists multiple pad types with the following key parameters:

• Print Area Diameter: Ranges from 8 mm to 82 mm, indicating the size of the printable surface.
• Pad Diameter: Varies between 10 mm and 100 mm, representing the overall pad size.
• Pad Height: Heights range from 20 mm to 79 mm, defining the thickness of the pad.
• Base Dimensions: Provided as width x length in mm, e.g., 25 x 14 mm, indicating the base size of the pad.
• Total Sizes (A, C, B, D): Numeric values representing various dimensional parameters of the pad, likely related to design or fitting specifications.
• Rubber Sizes (E): Codes such as FHP_001 to FHP_039 correspond to specific rubber components used in the pads.

2. Identification and Coding

Each pad is assigned a unique ID (e.g., 602, 603, 604) and a Code (e.g., FHP_001, FHP_002), which are used for cataloging and ordering. Dates associated with each entry indicate the last update or creation date, ranging from 2010 to 2015.

3. Data Presentation

The data is presented in a structured format listing print area diameter, pad diameter, height, base size, total sizes, and rubber sizes for each pad type. This allows for easy comparison and selection based on required dimensions.

4. Critical Parameters and Recommendations

• Dimension Matching: Ensure the print area diameter matches the intended printing surface for optimal print quality.
• Height and Base Size: Must be compatible with the printing machine and substrate to avoid mechanical issues.
• Rubber Size Codes: Use the specified rubber size codes to maintain consistency and compatibility with pad holders and printing equipment.

5. Limitations and Notes

• Some entries have missing or unclear values (e.g., "C ?"), which should be clarified before use.
• Dimensions are given in millimeters; verify unit consistency when integrating with other components.
• Dates indicate that some data may be outdated; confirm with the latest catalog or supplier for current specifications.

Summary Table Extract (Example)

Note: The table above is a sample extract to illustrate the data format.

Conclusion

This document serves as a comprehensive technical reference for selecting Pads HP series07 printing pads based on dimensional and rubber size requirements. Users should verify all parameters against their specific application needs and consult updated sources for the latest product information.