1. Catalogs
  2. Toscano Linea Electronica
  3. Brochure Vigilec Cabinet VC - Control and protection panel for wells or boreholes
video corpo

Brochure Vigilec Cabinet VC - Control and protection panel for wells or boreholes

Brochure Vigilec Cabinet VC - Control and protection panel for wells or boreholes

Brochure Vigilec Cabinet VC - Control and protection panel for wells or boreholes

Product catalog summary

Overview

This document presents the VC cabinet, a control and protection panel designed for wells or boreholes with power ratings ranging from 15 to 45 kW. It supports both direct-on-line (DOL) and soft start configurations (soft start available upon request).

Product Codes and References

  • VC-DOL-15/18.5kW: Code 10002747
  • VC-DOL-22/30kW: Code 10002761 (soft start optional)
  • VC-DOL-37/45kW: Code 10002762 (soft start optional)

Technical Specifications

  • Power Supply: 400 VAC, ±20%, 50-60 Hz
  • Maximum Pump Current: 30–37 A / 44–60 A / 72–85 A (AC3)
  • Dimensions: 400 mm (height) x 300 mm (width) x 150 mm (depth)
  • Protection Level: IP66 (dust tight and protected against powerful water jets)
  • Control Voltage: 24 VAC
  • Control Module: TPM6
  • Control and Protection: Designed for one submerged or surface pump
  • Display Features: Digital display showing current (amps), running hours, number of starts, alarms, reset time, and settings
  • Remote Control: ON/OFF input available
  • Control Options: Can operate with or without probes (underload detection) or level float switches
  • Protections Included: Miniature Circuit Breaker (MCB), over/underload, phase failure, dry running, and protection against successive starts
  • Probe Support: Supports 1 or 2 probes and underload detection

Connections and Internal Configuration

The panel includes the following components and connections:

  • Power terminals: L1, L2, L3
  • Control terminals: A1, A2
  • TPM6 control module
  • Manual switch with positions MAN (manual), 0 (off), and AUT (automatic)
  • General MCB and control MCB
  • Contactor and current transformer
  • Cable glands for secure wiring

Additional Information

The cabinet is manufactured by Toscano Línea Electrónica, S.L., located in Alcalá de Guadaíra, Seville, Spain. Contact details include phone +34 954 999 900 and email [email protected].

Summary of Critical Features

  • Robust IP66 enclosure suitable for harsh environments
  • Flexible control options including direct start and soft start
  • Comprehensive protection mechanisms to ensure pump safety and longevity
  • Digital monitoring and remote control capabilities
  • Compact dimensions facilitating installation in various settings
See more

Catalog excerpts

Brochure Vigilec Cabinet VC - Control and protection panel for wells or boreholes-1

The perfect solution for wells or boreholes, from 15 to 45kW Control and protection panel. Direct or soft start.

 Open the catalog to page 1
Brochure Vigilec Cabinet VC - Control and protection panel for wells or boreholes-2

Internal configuration Control and protection of 1 submerged or surface pump Current transformer (*) Control MCB Control with or without probes (underload) or level float switches Protections: MCB, over/underload, phase failure, dry running and successive starts TPM6 control module Digital display (amps, running hours, no. of A2 starts, alarms, reset time and settings) Remote control input ON/OFF Power and control terminal blocks Single-line diagram Specifications Power supply Maximum pump current Dimensions (1) and protection level Control voltage VC-DOL-37/45kW (*) Soft start on request Control...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.