Group: Alta
Catalog excerpts
TOS KURIM Gantry machining centre
Open the catalog to page 1Company’s profile Key features ++ essential machine parts – castings The production and the assembly of precise boring machines, lathes, knee type milling machines and special machines were started at TOS in the newly established halls. ++ movable gantry, fixed cross-rail ++ portal travel guide in longitudinal axis integrated into table ++ optionally divided workspace Origination of the national enterprise ČKD BLANSKO. Metallurgical and Engineering departments were expanded even more. The enterprise focused on the manufacture of water turbines, heavy machine tools and engineering...
Open the catalog to page 2General characteristics of gantry machining centre FRF HEADSTOCK AND CROSS SLIDE with indexable C-axis with continual C-axis SPINDLE HEAD exchangeable Vx non-exchangeable O non-exchangeable MO, MK TOOL EXCHANGE chain type magazine TOOL COOLANT SYSTEM only low pressure or low pressure and high pressure OPERATOR STATION height non-movable work platform with CNC control system COVERING OF WORKING SPACE cabin with plastic curtain Siemens, Heidenhain or Fanuc MACHINE COOLING SYSTEM WITH CHILLER cooling of the gearbox and spindle heads SAFETY FENCE wire fence WORKING SPACE longitudinal fixed...
Open the catalog to page 3TOS KURIM Main components Basic parameters Table Gantry Execution type 350 - 400: two servomotors with the epicyclic gearboxes and a rack and pinion drive The backlash is eliminated by means of the MASTER - SLAVE system (Y axis)
Open the catalog to page 4TOS KURIM Main components Headstock + the main carrying part of the headstock is a saddle of cast iron having the square section for the headstock 500 x 500 + the headstock is equipped in its back part with two profile strips of guideways with bearing packs; these guideways are determined for the vertical headstock motion in the cross slide. Exchangeable spindle heads of our design and production + rotation around the headstock axis in the range of ± 185° (C-axis), CNC axis having the contouring control system (± 0,001°) with possibility of mechanical indexing by 1° + standard head types -...
Open the catalog to page 5TOS KURIM Main components Automatic exchange of spindle heads Characteristics of axes X, Y, Z Trolleys for automatic exchange of spindle heads iFrame for automatic exchange of spindle heads + spindle heads are located on the trolleys + working stroke extension in the X-axis by 1 000 mm is required for trolleys + the trolleys are locked in the positioning bases (min. 2pcs) in front of table face, when the exchange of spindle heads is performed + the spindle heads are located on the fixed frame in front of the table face (2 - 6 spindle heads, in dependence on table width) + covering is...
Open the catalog to page 6TOS KURIM Machine accessories Control system Coolant System MACHINE ACCESSORIES Low-pressure tool cooling Low-pressure and high-pressure tool cooling
Open the catalog to page 7TOS KURIM Machine type Table length Table length Table width 1) Thie dimensions are given by the minimum distances which are necessary for the operator's motion. The actual dimension can be larger, in dependence on the dimensions of the used fence fields.
Open the catalog to page 8Product portfolio Horizontal machining centres pressure chamber machining tram bogie frame machining FU Portal machining centres welded plate edge machining railway carriage machining FRP Vertical lathes SKD cylinder block machining electro motor shaft machining SKJ Single-purpose machines aero-engine Fan CASE machining 18 locomotive bogie frame ma
Open the catalog to page 10Registered office: Blanenská 1321/47 664 34 Kurim Czech Republic
Open the catalog to page 11All TOS KURIM catalogs and technical brochures
-
General Catalogues
20 Pages
-
Application_power industry
44 Pages