
Document Overview:
This document appears to be a promotional or introductory material for Torso Tools Pvt. Ltd., a company specializing in tube pulling systems and related bolting and machining services.
Note: The document does not contain detailed technical specifications, procedures, standards, or graphical data related to the tube pulling system. It primarily serves as a company introduction and contact information.
TUBE PULLING SYSTEM
Open the catalog to page 1• Light Weight Design allows higher mobility • Small foot print suitable for confined areas • Higher Productivity • Near silent operation reduces operator fatigue Power pack (Continuous tube pulling)
Open the catalog to page 2Tool Balancer: To suspend pulling gun Sockets: To drive mandrels with impact wrench Impact Wrench: To drive mandrels ‘Pine Jenny’ Style Tube Pulling Accessories‘Pine Jenny’ Tube Spears 1.1/4”-3” Tube Spear Model Number TubeOD BWG Note: For other sizes of ‘Pine Jenny’ Spears. Please enquire.
Open the catalog to page 3Consumables - Contipuii
Open the catalog to page 4JAW-TPJ COLLAR-TPC TUBE
Open the catalog to page 5TSTPP 300 (Electric) Pump Specifications Model Note: Max. Working Pressure 700 Bar ALL Powerpacks supplied with 5 mtr. long hydraulic hoses.
Open the catalog to page 6Pneumatic tube spinner is designed to remove and flatten nonferrous tubes from 5/8” to 1 14” OD. Can also be used to extract ferrous tubes from 5/8” to 1 V2” OD using special shaped rolls sized to fit each tube. Features • Pulling rolls are made from tool steel and hardened for extended life. • High quality, strength construction body is made from aircraft grade aluminum. • Fully sealed bearings guarantee thousands of hours trouble free operation! • Pulling Speed • Standard Configuration • Motor Power up to 30m per minute 1” nonferrous tubes 2 x 2800 l/min - 2 * 95 cfm 6.2 bar - 90 psi 2 x 3.5...
Open the catalog to page 7Tube Wall Reducer • This tool is used to reduce the wall thickness of heavy gauge tube • This tool is suited for 5” tube • This tool is used with chipping hammer to knockout the tube stubs I & tubes from the tube sheet • This tool is used with chipping hammer to collapsed the tube stubs tubes & drive out from the tube sheet While Ordering specify the gauge with O.D. of tube. Long reach also available as per the requirement. While Ordering specify the gauge with O.D. of tube & Shank required. Standard Reach is 6” Long reach also available on request. While Ordering specify the shank with O.D....
Open the catalog to page 8• Push type Tube Cutter cuts Ferrous or Non-Ferrous tubes of the Condensers, Fleat-Exchangers • This internal tube cutter can be operated with a Electrical or Pneumatic drill machine Note: Refer to operation manual for detailed features and parts list.
Open the catalog to page 9The tool Pierce the Ferrous & Non-Ferrous Tubes in one turn alone This is a hand operated tool which is used with a ratchet handle • This tool is fitted with an adjustable collar to achieve the required cutting length. Tube O.D. Standard adjustment reach is 6". The tools are available in the increments of 2” upto 12”.
Open the catalog to page 10• No power required: Manual Insertion of tool & easy removal of tube with a hand wrench Tube Size Note: For larger / other sizes, please enquiry.
Open the catalog to page 11“MEETING EXCEPTIONAL JOINT INTEGRITY CHALLENGE” Where accuracy and precision is essential, Torso Products & Onsite Services delivers results. We have a World Class Team across the globe that is ready to serve your Bol ng & Machining needs. TORSO TOOLS PVT. LTD. RTC-57, 1St Floor, Sector - 8, MIDC Industrial Area, Rabale , Navi Mumbai - 400 701, INDIA. Tel.: +91 8976674767 | E-Mail: [email protected] | Web: www.torsotools.co
Open the catalog to page 122 Pages
1 Page
6 Pages
8 Pages
9 Pages
15 Pages
27 Pages