RT SERIES
7Pages

RISER TOOL WRENCH Our patented RT Series riser tool is a hydraulic speed/torque wrench combination, designed for use during make-up or breakout of any sub-sea riser bolted flange. With the push of a hand-held button, the RT Series riser tool spins the nut down at high speed and then automatically completes the torque to a preset limit when making up. When breaking out, the tool does the exact opposite, using the ratcheting operation to break the nut loose and then spinning it out at high speed. FAST NO HANDS EXTREME TORQUE SQUARE DRIVE REACTION The riser tools make up or break out a single riser bolt in seconds. This greatly reduces operating time during bolting and saves money. The RT Series switches from run-down mode to torquing mode automatically. Using the handheld remote push button allows operators to use the riser tools without any need for manual adjustment, making them completely hands-free, and creating an absolute-safe environment. The three models of tools give you a wide range of torque capability, but with a maximum torque capacity of 38,000 ft./lbs., you can be sure your bolts are secure and that they are able to be broken out when the time comes. The 2½” square drive can be used with multiple standard-size square drive impact sockets or in-house modified specialty sockets. It easily converts from make-up to break-out allowing effective use of the tools for either application. The RT Series has three possible reaction bars, each designed for different types of riser. We offer inline reaction bars that react off of the riser, drop down reaction bars that react off of the flange, and Load King reaction bars that react off of both. COMPLETE PACKAGE Available with the dual-control console, sockets, and overhead spring balancers that can be used to reduce the weight of the tool to as low as one pound. Every tool is tested and calibrated to +/- 3% accuracy, tracable to N.I.S.T., and Torq/Lite calibrates all of their riser tools for free for the life of the tool.

DCC SPRING BALANCERS SOCKETS Custom-built, aluminum dual-control conversion console, utilizes rig hydraulics up to 3,000 p.s.i. and provides continuous volume of hydraulic fluid required to independently operate two riser tools simultaneously. By using the overhead spring balancers, you can virtually eliminate the weight of riser tool, which reduces operator fatigue and increases efficiency of operation. The balancers are adjustable so that you can use them to your specifications. We stock all standard-size sockets and we can also modify sockets in-house to fit any or your particular needs...

SQUARE DRIVE

RISER TOOL WRENCH Torq/Lite’s RT-S Series riser tool is a hydraulic speed/torque wrench combination, designed for use during make-up or break-out of Shaffer FT-H and FT-G sub-sea riser bolted flanges. With the push of a hand-held button, the RT Series riser tool spins the nut down at high speed and then automatically completes the torque to a preset limit via the ratcheting mechanism when making up. When breaking out the tool does the exact opposite, using the ratcheting operation to break the nut loose and then spinning it out at high speed. The RT-24S and RT-40S, specially designed to fit...

SQUARE DRIVE This tool is approved for explosive environm

FLUID CAPACITY HYDRAULIC HOSES CABLE TRAVEL

RISER STRING WORKSHEET CONTACT NAME ___________________________ PHONE___________________________ COMPANY _______________________________ FAX _____________________________ ADDRESS __________________________________________________________________ CITY _____________________ STATE _______________ ZIP ________________________ MANUFACTURER/BRAND_____________________________________________________ MODEL/SERIES ____________________________________________________________ MAX. MAKE-UP TORQUE (FT/LBS)______________________________________________ CHOKE AND KILL LINE...