A Torq/Lite pneumatic torque wrench consists of a robust air motor driving a multiplier with three or more stages of epicyclic gearing. You control the torque by controlling the air pressure. An air pressure vs. torque graph is supplied with each tool and allows specific torque values to be set. For more critical applications, pneumatic wrenches can be fitted with a torque transducer and the precise torque output displayed. The tool can then be shut off at the desired torque either manually or automatically using suitable control circuitry. PRESSURE GRAPH TORQUE Torq/Lite multiplier operation is quiet - less than 85 dB(A) - with absolutely no impacting. These two factors make Torq/Lite multipliers comfortable for the operator to use, reducing fatigue and increasing safety. Torq/Lite multipliers provide accurate torque control: they will stall repeatably to +/- 2%. Multipliers are operated in conjunction with a Lubro Control Unit (LCU) to set the torque

The High-Speed Series TLSM-370 & TLSM-590 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. Fast - 800 N-m version has a free speed of 224 rpm for rapid bolt run-down. The High-Speed Series TLSM-738, TLSM-1000, and TLSM-1475 tools use the same 'twin motor' handle as the TLSM-370 & TLSM-590 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds...

MODEL SQUARE PART NUMBER DRIVE NUMBER RANGE RANGE FREE SPEED

The Single-Speed Series is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to the respected gearbox range, sharing common torque reaction accessories with High-Speed and EvoTorque®2 tools. ■Designed to offer excellent power-to-weight ratio ■Up to 2.5kg weight saving compared with TLSM Series equivalents ■Easily accessible switch for forward and reverse operation ■±5% repeatability of reading from 20% to 100% of range ■Air coupling designed for safety and rapid operation...

MODEL SQUARE NUMBER DRIVE R2 TOOL REACATION max. WEIGHT kg. WEIGHT kg.

The Wheel Nut series of tools were designed to meet the needs of the commercial vehicle wheel market. The integrated reaction foot is designed specifically to reach recessed wheel bolts and the 72mm diameter gearbox is selected to cope with the high frequency of use demanded by busy tire shops. KEY FEATURES: • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator • Quiet - less than 85 dB(A) when under load. • Square drive is quickly and easily replaceable. • 'Soft Start' trigger controls / aids socket location and allows...

LUBRO CONTROL UNIT Torq/Lites (LCU) standard filter, regulator, lubricator unit features a 100mm diameter gauge for easy and accurate setting of air pressure with ergonomic placement of air pressure adjustment control. It is supplied with 3 meters of robust, steel braded air hose with fittings to connect to our PneuTorque wrenches. SPECIFICATIONS: Input port thread: ½” BSP. Output port thread: ½” BSP. Minimum hose bore: ½”. Oil: FUCHS SILKAIR VG22 or SHELL TELLUS S2 VX15 or equivalent. Input pressure: Maximum 145 psi / 10 bar / 1.0 MPa. Proof rating 217 psi / 15 bar / 1.5 MPa. Output pressure:...

ELECTRONIC TORQUE TOOL The EvoTorque® 2 is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and, when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia. Consequently, EvoTorque® 2 can apply torque accurately over a wide range of joint rates from hard (high torque rate) through to soft (low torque rate). All EvoTorque® 2 tools are highly tolerant of supply voltage and frequency...

RANGE RANGE FREE SPEED NM FT./LBS. RPM

The EvoTorque® Battery Tool (EBT) features a new brush-less motor, data memory and data transfer capabilities. Combined this with their respected gearboxes to deliver a range of fast, reliable, accurate battery torque tools. • Tool is not constrained by power cable or hose, improving safety, convenience and versatility • Torque, Torque & Angle and Torque Audit modes available • 'Torque Only' mode provides the user with 'Ease of Use' functionality aiding tool familiarity • Display and on-board storage of final torque or torque and angle values • 3,000 reading memory, time and date stamped • Clear...

MODEL SQUARE NUMBER DRIVE (Auto Two-Speed) PART RANGE RANGE Note: These kits include: tool, (2) batteries, (1) charger, and (1) secondary handle in a carrying case. * Tool weight excludes both reaction and battery. Batteries weigh 0.8 kg.