JN SERIES
5Pages

Our patented JN Series hydraulic wrench is designed is designed specifically for fast, safe and specifically for fast, safe , and accurate tightening or accurate tightening or loosening of Top loosening of Packing Nuts and Gas Compressor Drive Top Drive Packing Nuts and Gas Compressor Piston Rod Crosshead Jam Nuts. Nuts. Piston Rod Crosshead Jam In-house specialty adapters/inserts can be used In-house specialty adaptors/inserts can with the JN Series to turn any nut that faces the be used with the JN rod to turn running problem of having a shaft, Seriesor tube any nut center. through itsthat faces the problem of having a shaft, rod or tube running through its center. The JN Series features a patented “split-head" design, enabling the tool to fit over the wash pipe The JN and around your packing “splitor piston rod Series features a patentednut or jam nut. head” design, enabling the tool to fit over the wash pipe or piston rod and around your packing nut or jam nut. SPLIT HEAD The "split-head" itself, or through use of special made adapter/ insert, can fit any size or type of Top Drive Packing Nut, OEM Jam Nut, hex or any other configuration, eliminating the need for expensive after market nuts giving you never-before-seen accuracy, speed and safety. The patented “split-head” design can be placed around the wash pipe, piston rod, or any other type of shaft, rod, pipe, or tube and on the nut or adapter/insert in less than one minute. Accurate tightening or loosening of the jam nut is easily achieved in just a few seconds. The JN Series hydraulic wrench eliminates unsafe hammer wrenches, hydraulic jacks or cranes, and other unsafe equipment currently being used to turn these nuts. ACCURATE FUNCTIONAL This fast hydraulic wrench, provides accuracy to +/- 0.03 with the use of a standard bidirectional 10,000 p.s.i. hydraulic pump. The JN Series hydraulic wrench will work equally well in either Top Drive wash pipe assemblies or compressor crosshead access ports. It will work right-side up, upside-down, sideways, etc. for both loosening and tightening. Allow hose movement without hose binding. Nickel-plated steel quick connects, with fewer moving parts, moving in every direction you might need them to -- a great improvement to other swivels in the industry. Every tool is tested and calibrated to +/- 0.03 accuracy and +/- 0.01 repeatability traceable to N.I.S.T. standards.

HEIGHT WIDTH RADIAL CLEARANCE SPLIT HEAD” WEIGHT WITH RANGE HEAD

Company Information Order Number____________________________________________________ Date____________________________ Contact Name________________________ Title________________________ Phone __________________________ Company_________________________________________________________ Fax _____________________________ Address___________________________________________________________________________________________ City_____________________________ State _________________________ Zip ________________________________ Compressor Information Compressor Manufacturer/Brand...

The JNAHC-AHR series pump is a rotarystyle air motor and should be used where air is the preferred source of energy. It has a 3hp motor when it is starting under full load and two-speed operation for rapid cylinder advance. This pump features a remote with full control over advance and return. The tandem center holds the load when the pump is shut off. Continuous duty Advance, hold & retract operation

The JNEHC-10 is a heavy duty electric pump made for multiple applications with a low voltage starting potential. The pump features a 10’ remote motor control with full control over advance, hold and retract operations. The tandem center holds the load when the pump is shut off. True unloading valve achieves greater pump efficiency, allowing higher flow at maximum pressure. **Pump shown is with a 4-port manifold. Sold with single port manifold. NOT TO BE USED FOR LIFTING APPLICATIONS. 1-1∕8 hp,12,000 rpm, 230 volt, 50∕60 Hz universal motor; draws 15 amps at full load, starts at reduced...