Filter Press Draco®
12Pages

FILTER PRESS (tBS^ 4sj®MrATEH EQUIPMENT INDVJsTB'^ DRACO®, FILTER PRESS

Process Description Automatic sludge dewatering Filter press operation: Filtering cycle will start with the filter press closed. 1. CLOSURE OF FILTER PRESS. The initial phase of the filtering cycle starts with the closure of filter press. Movable plate is triggered by hydraulic system and is moved closing the filter at the pressure needed for the work, which is controlled with a pressure switch positioned in hydraulic circuit. 2. FILLING. Starts the sludge pumping to filter press. Chambers are filled with sludge and starts the formation of cakes. Solid particles are retained on the cloth’s...

Close filter press Openend and cake discharge Open execution: Closed execution: - Cancel option with installation of different taps. - Enables an easy inspection of the filtrate. - Enables a quick troubleshooting of the broken/damaged cloth. - Suitable to prevent the outside contact of the drained water and thus protect it from any contamination. - Perfect for working with hazardous products. - Enables the cleaning of cloths and the blowing of cakes.

Compact assembly of the Draco® Filter Press, fitted in a 20' DV or 40' DV container subject to the equipment size which contains Advantages of the Draco® compact unit: - Rapid installation. - Easy transportation. - Minimal footprint required. - Minimal visual impact. Containerization: - 20ft container. - 40ft container. - Insulated containers. Draco® test Equipment Toro Equipment manufactures the Draco® testing/pilot units. These units enable the testing and subsequent analysis for specific applications.

Advantages and Applications Wastewater - Draco® Filter Press achieves more dryness, reducing the managing cost of produced sludge. Sludge easy to carry. Problems like the overflow of liquids in containers are avoided. Stackable sludge once dewatered. The high dryness degree improves handling, composting and management of sludge. 24 hours of full reliability. Unassisted operation due to shaking system of cakes. Low water consumption in the process. Minimum maintenance costs. No need for lubrication. Cycles operation 100% automated. Accurate control of actual sludge output. Enclosures which...

Maximum Maximum Maximum Maximum MODEL number length width height of plates mm (A) mm (B) mm (C) Pump Type: Cylinder of 23 cm3 Tank volume (l): 150 Power: 7,5 Kw Pump Type: Cylinder of 23 cm3 Tank volume (l): 150 Power: 7,5 Kw Frame: Material ST-52/AISI-304, Finish: Epoxy Paint Operation: Automatic Ral 2011 Pump Type: Cylinder of 25 cm3 Tank volume (l): 100 Power: 4Kw Frame: Material ST-37/AISI-304, Finish: Epoxy Paint. Operation: Automatic. Ral 2011 Downloadable drawings in www.toroequipment.com

Number of Number of Length mm Width Height mm Weight Weight Total filter FP total Plates and plates chambers (A) mm (B) (C) empty (Kg) loaded (Kg) area (m2) volume (l) mm Downloadable drawings in www.toroequipment.com (1) The FPA is supplied with: - Side protection plates. - Filtered water collection channel and handles. - Compressed air socket. - Equipped with cake-blowing circuit. - Emergency stop cable. - Hydraulic oil included. (3) The dimensions and specifications may vary slightly due to the normal development of products by the engineering...

Number of Number of Length mm Width Height mm Weight Weight Total filter FP total Plates and plates chambers (A) mm (B) (C) empty (Kg) loaded (Kg) area (m2) volume (l) mm Downloadable drawings in www.toroequipment.com (1) The FPSA is supplied with: - Side protection plates. - Filtered water collection channel and handles. - Compressed air socket. - Equipped with circuit-blowing cakes. - Hydraulic oil included. (3) The dimensions and specifications may vary slightly due to the normal development of products by the engineering department or Toro...

(1) The FPM is supplied with side shields. (2) The FPM is supplied with filtrate collection channel and handles. (3) The dimensions and specifications may vary slightly due to the normal development of products by the engineering department or Toro Equipment SL. When ordering request the specifications sheet at www.toroequipment.com

Standard Equipment Distribution panel FPA 120/115 Mobil filter press Protective wooden crate * Open Execution *2 Closed Execution Conveyor belt

Select your Filter Press dHow to determine the size of theFilter Press you need?? Design Details: • Sludge volume per day. • Kg of dry matter. • No. of working hours per day. The following is an example of pressing without lime knowing that the dryness obtained is 30%. Input data: Sludge volume 7m3/day, at 6% dryness In order to obtain kg of dry matter, we have to multiply the volume by dryness. The result is 420-kg of dry matter. Dryness of output cake should be 30%. Therefore, we get 1.4 m3/day of cakes at 30% = 1,400 l/day. If we want to perform 4 pressing cycles per day: 1,400/4 = 355...

Worldwide References Factory La Cisterniga - Valladolid Argentina Australia Austria Belgium Bolivia Brazil Bulgaria Canada Chile China Colombia Costa Rica Croatia Denmark Egypt Estonia Finland France Germany Greece Holland Hungary India Indonesia Ireland Israel Italy Japan Jordan Latvia Lebanon Lithuania Luxembourg Malaysia Mexico Moldova Morocco Pakistan Panama Peru Poland Portugal Romania Russia Saudi Arabia Seychelles Singapore South Africa Spain TORO EQUIPMENT S.L. (Factory) TORO EQUIPMENT S.L. (Factory & Offices) Ctra. Nacional VP-3302, Km 11. C/ Sauce s/n. Valladolid-Espana...