ALUMINIUM DOCK LEVELLER
6Pages

ALUMINIUM DOCK LEVELLER

These levellers are for bridging the space between docks and HGV load surfaces that are situated at different heights. They function as a route between the HGV and the areas of the building where goods are stored. They are tough and safe, ideal for use by people and transportation equipment whether operated manually or motorised, even in the least-favourable situations. Alapont levellers can be of two types: sliding levellers, which slide along a guide rail, and fixed levellers. Models of aluminium levellers: The transportable HFB leveller is ideal for bridging It is ideal for side loads or...

The KBS type folding load leveller is ideal for bridging minor and medium height differences up to 140 mm with a maximum allowed slope of 7.0º (=12.5 %). The possibility of being able to move the leveller left or right within its guide rail means it can be positioned exactly in the most suitable spot. For safe, effortless placement, the platform has a side lever for lowering and raising the leveller. The entire width of the support lip must rest on the vehicle floor. An anti-fall safety mechanism that automatically engages in the guide rail is a simple yet effective system to stop the...

Ctra. Alberic-Alzirakm 6.5-46600 Alzira. Tel.: +34 902 18 18 12. alapontlogistics.com f\\ /\PQ| | |

The SKB type of folding dock leveller was developed for bridging medium levels differences up to 140 mm with a maximum allowed slope of 7.0º (12.5%). This light aluminium platform, which rests on a sliding support of forged wheels with ball bearings, is easy to handle and move sideways. The steel guide rail is covered on top so it can be stepped on and does not get dirty. In its rest position, the leveller sits vertically at the dock's front edge, held by an anti-fall system that engages automatically when the platform is raised. Models with a length less than 1 065 mm without compensation...