EvoDECO 10-16
16Pages

s\> THINK PARTS THINK TORNOS For bars with diameters of 1 to 16 mm

Productivity ■ Up to 4 completely independent tool systems. ■ Up to 10 linear axes and two C axes which are perfectly interpolable. ■ Ultra-dynamic powered spindles with synchronous motors. Performance ■ Up to 27 tools including 15 rotating tools (EvoDECO 16 /10). ■ Option to work without guide bush (EvoDECO 16 only). ■ Wide selection of devices and peripherals. ■ Continuous temperature stabilisation. ■ Motor spindles offer high output and torque. ■ B positioning axis in counter operations (EvoDECO 16).

Simplified programming thanks to the TB-DECO software or standard ISO language. Autonomy Excellent removal of swarf and cutting oil. Great machining autonomy without human Huge machining area. Ergonomics designed with the operator in mind. Numerical Y41 setting axis (EvoDECO 10). intervention. Centralised lubrication. Integrated To

B positioning axis for greater productivity ■ Three motorised machining positions with an optional fixed 4th position available. ■ Even more complex parts can be produced. ■ Reduced setup time. ■ Improved precision and surface finish. ■ 0 - 90° indexing. ■ 0.001° resolution. New motorspindle technology ■Identical spindle and counter spindle with synchronous motors. ■ Integrated cooling system. ■Increase in power and torque on the main spindle and the counter spindle. ■Reduction in downtime (indexing, acceleration, deceleration), 0 to 14,000 rpm in 0.9 seconds (EvoDECO 10). ■Elimination of...

Brass Outer diameter: 0 13 mm Workpiece length: 3 mm Steel Outer diameter: 0 2 mm Workpiece length: 2 mm Brass Outer diameter: 0 9 mm Workpiece length: 1.5 mm Cobalt Chrome Outer diameter: 0 5 mm Workpiece length: 5.1 mm Titanium Brass Outer diameter: 0 4.5 mm Outer diameter: 0 6 mm Workpiece length: 8.26 mm Workpiece length: 40 mm Titanium Outer diameter: 0 12 mm Workpiece length: 30 mm Titanium Stainless steel Outer diameter: 0 7.1 mm Outer diameter: 0 9.3 mm Workpiece length: 34 mm Workpiece length: 110 mm

The choice of tool holder system has been made with a view to achieving complete versatility and a very high level of flexibility. All types of tool holder are equipped with a quick change system and adapted for use with preset tooling. EvoDECO machines are capable of resolving any machining issue, their possibilities are endless! For further information, please contact your nearest Tornos representative. Thread whirling Polygon operation As it was invented by Tornos, thread whirling is Whether it is tulip-shaped polygon operation, one of our specialities and there are no aspects thread...

Gear hobbing EvoDECO machines are also specialised watchmaking, EvoDECO10 can be equipped with in hobbing operations. To meet the needs of industries like micro mechanics and B axis The EvoDECO is the master in machining dental implants and other awkward shapes. These types of machining can be performed in main or secondary operation modes. As an optional extra, EvoDECO 16 can be equipped with a B axis, which substantially increases the production capabilities of the machine.

To better suit your needs, EvoDECO 10 and EvoDECO 16 are also available in two counter spindle, 19 tool positions including versions equipped with 8 or 10 linear axes. The 10-axis version is equipped with a combined unit (X31 / Z31) allowing frontal operations to be allows you to operate in differential mode (stroke EvoDECO 10 / 10: 10 axes with independent counter spindle and combined unit, 22 tool performed with ease. The combined unit proves indispensable for deep drilling operations. It also EvoDECO 10 / 8: 8 axes with independent positions including 10 rotating positions. ■■ All...

EvoDECO 16 is also available (counter spindle) axes, as well as the optional B EvoDECO 16 / 8: 8 axes with independent positioning axis for secondary operation, further counter spindle, 23 tool positions including broaden the capabilities of the machine. EvoDECO 16 / 10: 10 axes with independent counter spindle and combined unit, 27 tool positions including 15 rotating positions.

Programming TB-DECO programming software can be used to create programs for all single-spindle products in the EvoDECO family. ■ Easy to program, with icons for productive and non-productive operations. ■ Tool library. ■ Graphic synchronisation of simultaneous operations. ■ Calculation of actual machining time (Gantt chart). ■ Check the program and tool trajectories using graphic simulation. ■ Free update. ■ Tornos Software Hotline. Integrated PC ■ Modify programs on the machine. ■ Service instructions available on the machine. ■ Remote maintenance. ■ Possibility of monitoring various...

TISIS  PROGRAMMING AND COMMUNICATING : WITH YOUR EvoDECO MACHINE In addition to TB-DECO and its highly userfriendly Interfacing of CAM systems is also simplified for graphic management, Tornos now offers the customers using this system. The machine's 4 tool option of programming EvoDECO machines in systems are synchronised via the Tornos TISIS standard ISO. This option, which gives direct software. This software allows the 4 channels to access to the machine's numerical control, proves be displayed, thereby simplifying programming. particularly practical when wanting to create Management of...

EvoDECO 10 TECHNICAL SPECIFICATIONS _EvoDECO 10/10_EvoDECO 10/8 10 linear axes + 2 C axes 8 linear axes + 2 C axes 4 independent tool systems 3 independent tool systems Standard workpiece length with rotating guide bush mm Spindle speed of rotation rpm Spindle output kW Max. constant torque Nm Spindle stoppage time (10,000 rpm to 0) sec Mild steel drilling capacity mm Mild steel tapping capacity Guide bush holder (X11 / Y11 / S21) (X21 / Y21) Number of tool positions on guide bush Cross section of rotating tools Positions for rotating tools Rotating tools speed of...

Basic machine equipment Rotating guide bush S21 rear platen rotating tool motor S31 end attachment rotating tool motor S42 rotating tool motor in secondary operation C11 + C41 axes Interpolation in polar coordinates Fine tuning of the clamping force on S41 counter spindle Pneumatic ejection of workpiece + oil cleaning of collet Automatic centralised lubrication cycle Beacon (4 colours) Cooling pump with self-cleaning filter Timer for preheating cutting oil Fire extinguisher interface TB DECO ADV programming software TISIS programming software Cooling pump output kW 0,75 Cooling pump...