video corpo

Brochure MultiSwiss 6x14
12Pages

{{requestButtons}}

Catalog excerpts

Brochure MultiSwiss 6x14 - 1

think parts Think Tornos MultiSwiss 6x14 Multispindle automatic lathe with parallel numerical control.

Open the catalog to page 1
Brochure MultiSwiss 6x14 - 2

The efficient and economic solution for manufacturing parts of moderate complexity Automotive Watchmaking & Micromechanics

Open the catalog to page 2
Brochure MultiSwiss 6x14 - 3

MultiSwiss is a revolutionary new line of products that bridges the gap between single-spindle and multispindle lathes. MultiSwiss is equipped with 6 sliding headstock spindles that use torque motor technology for barrel indexing. Its ultra-high speed makes it possible to achieve near cam driven multispindle cycle times. Productivity ■■ Completely numerically controlled. Ultra-rapid turret indexing. Ultra dynamic spindles. Independent spindle speeds. 14 linear axes, 7 C axes. Up to 18 tools (3 tools per position). Thermo regulated machine core. Excellent chip removal and handling. Chucker...

Open the catalog to page 3
Brochure MultiSwiss 6x14 - 4

POWER AND FLEXIBILITY, A GUARANTEE OF FLAWLESS PRODUCTION 3 editions to satisfy all your machining requirements : Silver Edition : White Edition : Machine for bar machining only. Chucker machine with loading systems to suit your needs. Machines can convert to bar machines. Rapid barrel indexing made possible by the torque motor. Sliding headstock spindles with hydrostatic bushings. Ultra dynamic synchronous spindle drives. Independent speed for each position. Polygon milling. 14 linear axes, 7 C axes. Multi-tool design that allows the fitment of up Exceptional rigidity through guide...

Open the catalog to page 4
Brochure MultiSwiss 6x14 - 5

Black Edition : Equipped with a Y axis to broaden the range of parts. Extremely quiet machine operation. Fast and easy Set up changes. Front access for easy access to tools during Cost-effective manufacturing of parts, even Low and high pressure cutting oil supply integrated into slides. Easy to programme with TB-DECO software. Presettable toolholders with integrated Optimized cycle time through the selection Collet adjustment from the front. “One piece machine” design, with barfeeder, Chucker (optional). Reduced floor space.

Open the catalog to page 5
Brochure MultiSwiss 6x14 - 6

The barrel guarantees maximum precision at all The high-power synchronous drive spindles give positions. The new indexing technology using the machine great power. Acceleration times a torque motor allows for 0.3 sec indexing times, are extremely short (0-8,000 rpm in less than one second). In addition to its own C axis, each This system was tested for its reliability in spindle has its own Z axis guided by hydrostatic over 40 million cycles before it received the bearings. This allows for increased shock Tornos validation certificate. absorption and better lifespan of the tools and The...

Open the catalog to page 6
Brochure MultiSwiss 6x14 - 7

GUARANTEED COST-EFFECTIVENESS Modular multi-tool design Back working Up to a maximum of 18 tools can be mounted The independent back working slide with to the machine, with up to 3 tools per position. capacity for 2 tools, combined with the second It is also possible to mount various types of operation drive spindle, allow for complex attachments including  polygon milling attach: turning or milling operations in masked time that ments, standard or high-frequency drills for can be oriented with respect to the operations main and back work operations, thus expanding the possible...

Open the catalog to page 7
Brochure MultiSwiss 6x14 - 8

Barfeeding  the choice of 1.5 m bars : The MultiSwiss was designed with the operator This innovative design reduces logistics costs. in mind. With its excellent frontal access, Loading is easier for the operator, thus it is user-friendly, ergonomic and innovative. allowing for increased machining quality thanks The machining zone is completely open, allowing to reduced vibrations. This new barfeeding system also reduces chip length excess thickness Chip removal is trouble-free thanks to the for the face milling of each part. vertical slides that allow the chips to fall directly into the...

Open the catalog to page 8
Brochure MultiSwiss 6x14 - 9

Water / oil heat exchanger Electrical cabinet Part outlet Chilled water production unit Cutting oil filtration device (50 µm) Optional 40 or 80 bar high-pressure pump Compact all-in-one design  ! The MultiSwiss takes up less floor space  : The TB-DECO ADV programming software all peripheral units required for operations are allows for the creation of any multispindle com- integrated at the back of the machine. ponent type  : The standard model of the MultiSwiss includes Easy programming with icons for productive and unproductive operations. a loader and two-level filtration system. The...

Open the catalog to page 9
Brochure MultiSwiss 6x14 - 10

MultiSwiss Black Edition : Y axis To make the machine even more Y14 flexible, it is possible to add a Y axis on slide no. 3 or 4 of the machine equipment. The Y axis has a stroke of 30 mm and a special plate. It is compatible with all MultiSwiss equipped with 3 special tool holders as well as a new device to increase MultiSwiss White Edition : Chucker Depending on the parts and quantities to be machined, it is possible to work in « Chucker » mode (machining from billets). By replacing the bar feed system with forged or formed workpiece feed systems, production costs can be drastically...

Open the catalog to page 10
Brochure MultiSwiss 6x14 - 11

TECHNICAL SPECIFICATIONS Max. main spindle speed rpm 8,000 Main spindle power kW 5.6 Main spindle torque Nm 7.5 Max. pickoff spindle speed rpm 8,000 Pickoff spindle motor power kW 5 Pickoff spindle motor torque Nm 6 Pickoff spindle Z stroke mm 150 Number of linear axes 14+1 (Y axis Black Edition machine) Number of rotating axes 7+1 (option) Number of cross slides during operation 5+1 (cutting) X stroke of cross slides during operation mm 40 Y stroke of the transverse slide in operation (Black Edition machine) mm 30 Number of cross slides for back work 1 X stroke of cross slides for back...

Open the catalog to page 11
Brochure MultiSwiss 6x14 - 12

Tornos Technologies Deutschland GmbH Karlsruher Str. 38 D - 75179 Pforzheim Tél. +49 (0)7231 / 910 70 Fax +49 (0)7231 / 910 750 contact@tornos.de Tornos Technologies France Boîte postale 330 St-Pierre en Faucigny F - 74807 La Roche s / Foron Cedex Tél. +33 (0)4 50 038 333 Fax +33 (0)4 50 038 907 contact@tornos.fr Tornos Technologies Ibérica Pol. Ind. El Congost Avda. St Julià, 206 Nave 8 E - 08403 Granollers Tél. +34 93 846 59 43 Fax +34 93 849 66 00 comercial.tti@tornos.com Tornos Technologies US Corporation 840 Parkview Boulevard US - Lombard, IL 60148 Tél. +1 630 812 2040 Fax +1 630 812...

Open the catalog to page 12

All TORNOS catalogs and technical brochures

  1. BA 1008 HP

    17 Pages

  2. TISIS

    16 Pages

  3. Swiss GT

    24 Pages

  4. EvoDECO

    15 Pages

  5. SwissDECO

    4 Pages

  6. SwissNano

    20 Pages

  7. MultiSwiss

    28 Pages

  8. Swiss DT Range

    13 Pages

Archived catalogs

  1. BA 1008

    17 Pages

  2. EvoDECO 20-32

    12 Pages

  3. EvoDECO 10-16

    16 Pages

  4. Swiss ST 26

    16 Pages

  5. CT 20

    9 Pages

  6. Robobar SBF

    8 Pages

  7. SAS 16.6

    16 Pages

  8. Gamma 20

    6 Pages

  9. MICRO 7

    8 Pages

  10. DECO 26a

    16 Pages

  11. DECO 20a

    16 Pages

  12. Product range

    14 Pages