Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Tormach
  3. xsTECH

xsTECH

xsTECH
1 / 1 PageView full catalog

xsTECH

Product catalog summary
Travels
X-Axis: 8.6 in. (220 mm)
Y-Axis: 6.3 in. (160 mm)
Z-Axis: 2.4 in. (61 mm)
Spindle
Power: 120 W (0.12 kW), Brushless DC
Maximum Speed: 20,000 RPM
Spindle Taper: ER11
Noise Level: <66 db(A)
Repositioning Accuracy: 0.004 in (0.10 mm)
Power Requirements
Single-Phase, 50-60 Hz
120 Vac (USA/Canada, PN 39177)
230 Vac (International, PN 50614)
Machine Specifications
Table Size: 12.6 in. × 5.9 in. (320 mm × 150 mm)
System Footprint: 15.4 in. × 15.7 in. (391 mm × 399 mm)
System Height: 16.7 in. (424 mm)
System Weight: 33 lb (14.9 kg)
Maximum Table Load: 6.6 lb (3 kg)
Warranty
1-Year Warranty against defects in material and workmanship.
Highlighted Features
Fully-Enclosed with Safety Door Switch
Tormach PathPilot® Control System with Keyboard, Mouse, Touchscreen, and Tormach Jog Shuttle
ER11 Collet for 1/8 inch, 1/4 inch, 4 mm, or 6 mm Tool Shanks
Starter Tooling Set with WER Collets and End Mills
Integrated Tool Setter and Clamp Kit
Machine Controller
User-friendly design with support for up to 4-axis continuous machining
Intuitive conversational programming
Usable G-Code Memory: 8 GB
Built-in Dropbox™ support for program transfer
PathPilot HUB: Browser-based simulator producing usable G-Code
Ideal for socially distant learning
Note: Specifications are subject to change without notice.
See more

Catalog excerpts

xsTECH-1

SPEC SHEET xsTECH CNC ROUTER MILL The ideal machine for socially distant learning TRAVELS X-Axis Spindle Power Maximum Speed Spindle Taper Noise Level (No Load Operation) Starter Tooling Set with WER Collets and End Mills 0.004 in (0.10 mm) Single-Phase, 50-60 Hz 120 Vac (USA/Canada, PN 39177) 230 Vac (International, PN 50614) MACHINE SPECIFICATIONS Table Size Typical System Footprint Overall System Height Typical System Weight Maximum Table Load Weight WARRANTY 1-Year Warranty against defects in material and workmanship. ©2023 Tormach (07/23) Specifications subject to change without notice. Tormach PathPilot® Control System with Keyboard, Mouse, Touchscreen, and Tormach Jog Shuttle POWER Power Required Fully-Enclosed with Safety Door Switch ER11 Collet Uses Popular 1/8 inch, 1/4 inch, 4 mm, or 6 mm Tool Shanks Repositioning Accuracy HIGHLIGHTED FEATURES Integrated Tool Setter Clamp Kit MACHINE CONTROLLER User-friendly design A Better User Experience PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. Support for up to 4-axis continuous machining Intuitive conversational programming Usable G-Code Memory: Touchscreen Controller: 8 GB Built-in Dropbox™ support for seamlessly transferring pro

 Open the catalog to page 1

All Tormach catalogs and technical brochures

  1. 24R
    24R

    1  Page

  2. 8L
    8L

    1  Page

  3. PCNC 440
    PCNC 440

    1  Page

  4. 770M
    770M

    1  Page

  5. 1100M CNC
    1100M CNC

    1  Page

  6. 770MX
    770MX

    1  Page

  7. 1100MX
    1100MX

    1  Page

  8. ZA6
    ZA6

    2  Pages

  9. 1300PL
    1300PL

    1  Page

  10. AF50+ AUTOFEED BANDSAW
    AF50+ AUTOFEED BANDSAW

    1  Page

  11. 8L CNC LATHE MACHINE
    8L CNC LATHE MACHINE

    1  Page

  12. 1500MX CNC MILLING MACHINE
    1500MX CNC MILLING MACHINE

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.
Are you a buyer?
Are you a supplier?
About Us