8L
8L
The document provides a detailed specification sheet for the 8L CNC Lathe Machine by Tormach, highlighting its user-friendly design and intuitive programming features. It emphasizes the machine's capabilities and technical specifications.
Key Features
- User-friendly design with intuitive conversational programming.
- Features include Rigid Tapping, Single Point Threading, and Constant Surface Speed.
- Usable G-Code Memory: 80 GB for PathPilot Controller and 40 GB for PathPilot Operator Console.
- Built-in Dropbox™ support for seamless program transfer.
PathPilot HUB
PathPilot HUB is a browser-based, full-featured simulator that produces usable G-Code, enhancing the user experience.
Spindle Specifications
- Spindle Power: 1.5 hp (1.11 kW).
- Spindle Speed: Low range from 180 to 2,500 rpm, High range from 350 to 5,000 rpm.
- Through Spindle Bore: 1 in. (25.4 mm).
- Maximum Stock Over Bed: 8 in. (200 mm).
- Maximum Stock Over Carriage: 4 in. (100 mm).
- Spindle Nose: 5C.
Tailstock Specifications
- Taper: MT2.
- Diameter: 0.9 in. (22 mm).
- Travel: 2.2 in. (55 mm).
Travel and Motion
- X-Axis Travel: 4.5 in. (114 mm).
- Z-Axis Travel: 10 in. (254 mm) with tailstock.
- Maximum Feed Rate for X- and Z-Axis: 150 IPM (3.8 m/min).
- Axis Drivers: High-Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers.
Power Requirements
- Single-Phase 115 Vac, 50/60 Hz, 15A breaker.
Machine Specifications
- Carriage Dimensions: 7.25 in. × 4 in. (185 mm × 102 mm).
- Machine Footprint: 50 in. × 26 in. (1.2 m × 0.7 m).
- Typical System Weight: 838 lbs. (380 kg).
- Maximum Swing Over Bed: 8 in. (200 mm).
- Maximum Swing Over Carriage: 4 in. (100 mm).
- Maximum System Height with Door Open: 66 in. (1.6 m).
- Overall System Height: 52 in. (1.3 m).
Warranty
The machine comes with a 1-year warranty against defects in material and workmanship, with an option for an extended warranty.
Accessories
- Standard: Quick Change Tool Post, Full Enclosure.
- Optional: Machine Stand, Coolant.
Note: Specifications are subject to change without notice.
Catalog excerpts
SPEC SHEET SPINDLE Spindle Power Spindle Speed Through Spindle Bore Maximum Stock Over Bed Maximum Stock Over Carriage Spindle Nose TAILSTOCK Taper TRAVELS X-Axis MOTION X- and Z-Axis Maximum Feed Rate Axis Drivers (X,Z) 150 IPM (3.8 m/min) High-Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers POWER Power Requirements MACHINE SPECIFICATIONS Carriage Length × Width Machine Footprint Typical System Weight Maximum Swing Over Bed Maximum Swing Over Carriage Maximum System Height with Door Open Overall System Height WARRANTY 1-Year Warranty against defects in material and workmanship. Extended Warranty available. ©2023 Tormach (11/23) Specifications subject to change without notice. ACCESSORIES Quick Change Tool Post (Standard) Full Enclosure (Standard) Machine Stand (Optional) Coolant (Optional) MACHINE CONTROLLER User-friendly design A Better User Experience Intuitive conversational programming Features: • Rigid Tapping • Single Point Threading • Constant Surface Speed Usable G-Code Memory: PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. PathPilot Operator Console: 40 GB Built-in Dropbox™ support for seamlessly transferr
Open the catalog to page 1
