8L CNC LATHE MACHINE
8L CNC LATHE MACHINE
The document provides technical specifications and features of the 8L CNC Lathe Machine by Tormach, emphasizing user-friendly design and intuitive programming.
Key Features
- User-friendly design with intuitive conversational programming.
- Features include Rigid Tapping, Single Point Threading, and Constant Surface Speed.
- Usable G-Code Memory: 80 GB for PathPilot Controller and 40 GB for PathPilot Operator Console.
- Built-in Dropbox™ support for seamless program transfer.
PathPilot HUB
A browser-based, full-featured PathPilot simulator that produces usable G-Code, enhancing user experience.
Spindle Specifications
- Power: 1.5 hp (1.11 kW).
- Speed: Low 180 to 2,500 rpm, High 350 to 5,000 rpm.
- Through Spindle Bore: 1 in. (25.4 mm).
- Maximum Stock Over Bed: 8 in. (200 mm).
- Maximum Stock Over Carriage: 4 in. (100 mm).
- Spindle Nose: 5C.
Tailstock Specifications
- Taper: MT2.
- Diameter: 0.9 in. (22 mm).
- Travel: 2.2 in. (55 mm).
Travel and Motion
- X-Axis Travel: 4.5 in. (114 mm).
- Z-Axis Travel: 10 in. (254 mm) with tailstock.
- Maximum Feed Rate for X- and Z-Axis: 150 IPM (3.8 m/min).
- Axis Drivers: High-Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers.
Power Requirements
Single-Phase 115 Vac, 50/60 Hz, 15A breaker.
Machine Specifications
- Carriage Dimensions: 7.25 in. × 4 in. (185 mm × 102 mm).
- Machine Footprint: 50 in. × 26 in. (1.2 m × 0.7 m).
- Typical System Weight: 838 lbs. (380 kg).
- Maximum Swing Over Bed: 8 in. (200 mm).
- Maximum Swing Over Carriage: 4 in. (100 mm).
- Maximum System Height with Door Open: 66 in. (1.6 m).
- Overall System Height: 52 in. (1.3 m).
Warranty
1-Year Warranty against defects in material and workmanship, with an option for an extended warranty.
Accessories
- Quick Change Tool Post (Standard).
- Full Enclosure (Standard).
- Machine Stand (Optional).
- Coolant (Optional).
Note: Specifications are subject to change without notice.
Catalog excerpts
SPEC SHEET SPINDLE Spindle Power Spindle Speed Through Spindle Bore Maximum Stock Over Bed Maximum Stock Over Carriage Spindle Nose TAILSTOCK Taper TRAVELS X-Axis MOTION X- and Z-Axis Maximum Feed Rate Axis Drivers (X,Z) 150 IPM (3.8 m/min) High-Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers POWER Power Requirements MACHINE SPECIFICATIONS Carriage Length × Width Machine Footprint Typical System Weight Maximum Swing Over Bed Maximum Swing Over Carriage Maximum System Height with Door Open Overall System Height WARRANTY 1-Year Warranty against defects in material and workmanship. Extended Warranty available. ©2023 Tormach (11/23) Specifications subject to change without notice. ACCESSORIES Quick Change Tool Post (Standard) Full Enclosure (Standard) Machine Stand (Optional) Coolant (Optional) MACHINE CONTROLLER User-friendly design A Better User Experience Intuitive conversational programming Features: • Rigid Tapping • Single Point Threading • Constant Surface Speed Usable G-Code Memory: PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. PathPilot Operator Console: 40 GB Built-in Dropbox™ support for seamlessly transferr
Open the catalog to page 1
