770MX
770MX
- 10-Pocket Automatic Tool Changer
- PathPilot Operator Console
- 4th Axis
- SmartCool™ Coolant System
- RapidTurn® Chucker Lathe Accessory
- User-friendly design supporting up to 4-axis continuous machining
- Intuitive conversational programming
- Usable G-Code Memory: 80 GB for PathPilot Controller, 40 GB for PathPilot Operator Console
- Built-in Dropbox™ support for seamless program transfer
- PathPilot HUB: A browser-based, full-featured PathPilot simulator producing usable G-Code
- Travels: X-Axis: 14 in. (356 mm), Y-Axis: 7.5 in. (191 mm), Z-Axis: 13.25 in. (337 mm)
- Spindle: Power: 1.5 hp (1.12 kW), Max Speed: 10,000 RPM, Transmission: Poly-V Belt, Taper: BT30
- Thread Machining: Rigid Tapping, Tension/Compression, Thread Mill
- Maximum Feed Rate: X- and Y-Axis: 300 IPM (7.62 m/min), Z-Axis: 250 IPM (6.35 m/min)
- Power: Single-Phase 115 Vac, 50/60 Hz, 15A breaker
- Table Size: 26 in. × 8 in. (660 mm × 203 mm)
- Table Slots: 5/8 in. (15.9 mm) (three slots)
- Spindle Nose to Table Max Clearance: 13.75 in. (349 mm)
- Spindle Centerline to Machine Column: 8.6 in. (218 mm)
- Typical System Footprint: 56 in. × 48.5 in. (1422 mm × 1232 mm)
- Overall System Height: 88 in. (2235 mm)
- Typical System Weight: 950 lbs. (431 kg)
- Maximum Weight on Table: 500 lbs. (227 kg)
- Cast iron frame and table with hand-scraped hydrodynamic ways and tapered adjustment gibs
- Low-friction PTFE-filled, Acetyl-bonded sliding surface, similar to Rulon® and Turcite®
- 1-Year Warranty against defects in material and workmanship
- Extended Warranty available
Catalog excerpts
SPEC SHEET TRAVELS X-Axis SPINDLE Spindle Power Maximum Speed Poly-V Belt Spindle Taper BT30 • Rigid Tapping • Tension/Compression • Thread Mill Thread Machining MAXIMUM FEED RATE X- and Y-Axis POWER Single-Phase 115 Vac, 50/60 Hz, 15A breaker Power Required MACHINE SPECIFICATIONS 26 in. × 8 in. (660 mm × 203 mm) 5/8 in. (15.9 mm) (three slots) Table Size Table Slots Spindle Nose to Table Max Clearance Spindle Centerline to Machine Column Typical System Footprint Overall System Height Typical System Weight Maximum Weight on Table ACCESSORIES 10-Pocket Automatic Tool Changer PathPilot Operator Console 4th Axis SmartCool™ Coolant System RapidTurn® Chucker Lathe Accessory MACHINE CONTROLLER User-friendly design FRAME Frame and Table Cast iron frame and table, with hand-scraped hydrodynamic ways and tapered adjustment gibs Low-friction PTFE-filled, Acetyl-bonded sliding surface. Similar to Rulon® and Turcite®. WARRANTY 1-Year Warranty against defects in material and workmanship. Extended Warranty available. ©2023 Tormach (08/23) Specifications subject to change without notice. A Better User Experience Support for up to 4-axis continuous machining Intuitive conversational programming Usable G-Code Memory: PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. PathPilot Operator Console: 40 GB Built-in Dropbox™ support for seamlessly transf
Open the catalog to page 1
