770M
770M
- User-friendly design with support for up to 4-axis continuous machining.
- Intuitive conversational programming.
- Usable G-Code Memory: PathPilot Controller offers 80 GB, and PathPilot Operator Console provides 40 GB.
- Built-in Dropbox™ support for seamless program transfer.
- 10-Pocket Automatic Tool Changer.
- Power Drawbar.
- 4th Axis.
- SmartCool™ Coolant System.
- RapidTurn™ Chucker Lathe Accessory.
- PathPilot® Operator Console.
- Full Enclosure.
- High-Speed Spindle.
- Travels: X-Axis 14 in. (356 mm), Y-Axis 7.5 in. (191 mm), Z-Axis 13.25 in. (337 mm).
- Spindle: 1.5 hp (1.12 kW) power, maximum speed of 10,000 RPM, Poly-V Belt transmission, R8 spindle taper.
- Thread Machining: Includes tension/compression, auto-reversing, and thread mill capabilities.
- Maximum Feed Rate: X- and Y-Axis 135 IPM (3.43 m/min), Z-Axis 110 IPM (2.79 m/min).
- Power Requirements: Single-Phase 115 Vac, 50/60 Hz, 15A breaker.
- Table Size: 26 in. × 8 in. (660 mm × 203 mm) with three 5/8 in. (15.9 mm) slots.
- Spindle Nose to Table Max Clearance: 14.25 in. (362 mm).
- Spindle Centerline to Machine Column: 8.6 in. (218 mm).
- Typical System Footprint: 56 in. × 48.5 in. (1422 mm × 1232 mm).
- Overall System Height: 88 in. (2235 mm).
- Typical System Weight: 950 lbs. (431 kg).
- Maximum Weight on Table: 500 lbs. (227 kg).
- Cast iron frame and table with hand-scraped hydrodynamic ways and tapered adjustment gibs.
- Low-friction PTFE-filled, Acetyl-bonded sliding surface, similar to Rulon® and Turcite®.
- 1-Year Warranty against defects in material and workmanship. Extended Warranty available.
Catalog excerpts
SPEC SHEET TRAVELS X-Axis SPINDLE Spindle Power Maximum Speed Poly-V Belt Spindle Taper R8 • Tension/Compression • Auto-Reversing • Thread Mill Thread Machining MAXIMUM FEED RATE X- and Y-Axis POWER Single-Phase 115 Vac, 50/60 Hz, 15A breaker Power Required MACHINE SPECIFICATIONS Table Slots Spindle Nose to Table Max Clearance Spindle Centerline to Machine Column Typical System Footprint 10-Pocket Automatic Tool Changer Power Drawbar Table Size OPTIONAL ACCESSORIES Overall System Height Typical System Weight Maximum Weight on Table 4th Axis SmartCool™ Coolant System RapidTurn™ Chucker Lathe Accessory PathPilot® Operator Console Full Enclosure High-Speed Spindle MACHINE CONTROLLER User-friendly design FRAME Frame and Table Cast iron frame and table, with hand-scraped hydrodynamic ways and tapered adjustment gibs Low-friction PTFE-filled, Acetyl-bonded sliding surface. Similar to Rulon® and Turcite®. WARRANTY 1-Year Warranty against defects in material and workmanship. Extended Warranty available. ©2023 Tormach (08/23) Specifications subject to change without notice. A Better User Experience Support for up to 4-axis continuous machining Intuitive conversational programming Usable G-Code Memory: PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. PathPilot Operator Console: 40 GB Built-in Dropbox™ support for seamlessly tran
Open the catalog to page 1
