Catalog excerpts
SPEC SHEET TRAVELS X-Axis Spindle Nose to Table SPINDLE Spindle Power (Continuous) Spindle Power (Peak) Spindle Speed Spindle Taper Thread Machining MAXIMUM FEED RATES X- and Y-Axis Z-Axis OPTIONAL ACCESSORIES 1,200 IPM (30.5 m/min) 600 IPM (15.2 m/min) Plug Type Single-Phase 230 Vac, 50/60 Hz, 30A breaker* NEMA L6-30P Typical System Footprint (including coolant tank) Typical System Weight Maximum Weight on Table Wireless probe and tool setter MQL system Through-spindle coolant (coming fall 2024) Chip conveyor system (under development) MACHINE CONTROLLER PERFORMANCE Testing Automatic enclosure washdown system Mist collector (coming fall 2024) MACHINE SPECIFICATIONS Table Size microARC 6 – 6 in. (150 mm) 4th axis rotary table 36-gallon flood coolant tank and manual sprayer POWER AND AIR Power Required 16-pocket automatic tool changer (ATC) A Better User Experience Ballbar testing on every machine Bonded epoxy granite base and column castings Ways Motion System Linear rails EtherCAT control system PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. SHIPPING Pallet Weight Factory assembled: 3210 lbs. (1456 kg) Self assembled: 2650 lbs. (1202 kg) Crate Dimensions Factory assembled: 68 in. × 74 in. × 89 in. (1.7 m × 1.9 m × 2.3 m) Self assembled: 54 in. × 58 in. × 89 in. (1.4 m × 1.5 m × 2.3 m) *Additional outlets may be required for optional accessories. ©2024 Tormach (04/24) Specifications subject to change without notice. Powerful conversational programming: Use simple, fill-inthe-blank templates Built for modern, high-speed machining (HSM) CAM packages (like Fusion 360, SprutCAM, and MasterCAM) Expansive 80 GB storage for programs and setup data Dedicated tool wear compensation and max RPM fields per tool Improved trajectory planning/ smoothing Ballbar data is added to the compensation table to improve accuracy Convenient file management over network or PathPilot HUB WARRANTY 1-year warranty against defects in material and workmanship. Extended warra
Open the catalog to page 1
