1100MX
1100MX
- Travels: X-Axis: 18 in. (457 mm), Y-Axis: 11 in. (279 mm), Z-Axis: 16.25 in. (413 mm)
- Spindle: Power: 2 hp (1.49 kW), Max Speed: 10,000 RPM, Transmission: Poly-V Belt, Taper: BT30
- Maximum Feed Rate: X- and Y-Axis: 300 IPM (7.62 m/min), Z-Axis: 230 IPM (5.84 m/min)
- Power: Single-Phase 230 Vac, 50/60 Hz, 20A breaker
- Machine Specifications: Table Size: 34 in. × 9.5 in. (863 mm × 241 mm), Max Weight on Table: 500 lbs. (227 kg)
- Frame: Cast iron frame and table with low-friction PTFE-filled surfaces
- User-friendly design supporting up to 4-axis continuous machining
- Intuitive conversational programming
- Usable G-Code Memory: PathPilot Controller: 80 GB, PathPilot Operator Console: 40 GB
- Built-in Dropbox™ support for program transfer
- PathPilot HUB: Browser-based simulator producing usable G-Code
Catalog excerpts
SPEC SHEET TRAVELS X-Axis SPINDLE Spindle Power Maximum Speed Poly-V Belt Spindle Taper BT30 • Rigid Tapping • Tension/Compression • Thread Mill Thread Machining MAXIMUM FEED RATE X- and Y-Axis POWER Single-Phase 230 Vac, 50/60 Hz, 20A breaker Power Required MACHINE SPECIFICATIONS 34 in. × 9.5 in. (863 mm × 241 mm) 5/8 in. (15.9 mm) (three slots) Table Size Table Slots Spindle Nose to Table Max Clearance Spindle Centerline to Machine Column Typical System Footprint Overall System Height Typical System Weight Maximum Weight on Table OPTIONAL ACCESSORIES 12-Pocket Automatic Tool Changer PathPilot Operator Console 4th Axis SmartCool™ Coolant System RapidTurn® Chucker Lathe Accessory MACHINE CONTROLLER User-friendly design FRAME Frame and Table Cast iron frame and table, with hand-scraped hydrodynamic ways and tapered adjustment gibs Low-friction PTFE-filled, Acetyl-bonded sliding surface. Similar to Rulon® and Turcite®. WARRANTY 1-Year Warranty against defects in material and workmanship. Extended Warranty available. ©2023 Tormach (08/23) Specifications subject to change without notice. A Better User Experience Support for up to 4-axis continuous machining Intuitive conversational programming Usable G-Code Memory: PathPilot HUB is a browser-based, full-featured PathPilot simulator, producing usable G-Code. PathPilot Operator Console: 40 GB Built-in Dropbox™ support for seamlessly transf
Open the catalog to page 1
