Pneumatic Torque Wrench - RAPTOR RP Series

Product catalog summary

Overview: The document details the RP Series Pneumatic Torque Wrench, emphasizing its redesign, material optimization, and fit perfection. The wrench is engineered for durability and efficiency, suitable for demanding field conditions.

Specifications:

Constructed with hardened alloy steel for durability and long cycle life.
Features multi-stage planetary gear systems with optimized tooth design.
Lightweight aluminum handle with a slip-resistant coating.
Ultra-efficient air motor designed for easy maintenance.
Cartridge-style valves for easy replacement and one-finger trigger control for forward and reverse.
Sealed with O-rings to keep grease in and water/dirt out.

Performance Data:

Air Pressure Requirement: 10-90 psi, Flow: 45-55 CFM.
Model Variants: RP-500, RP-1000, RP-2000, RP-3000, RP-6000.
Torque Range: 78-5990 ft/lbs (106-8121 nm).
RPM varies with air pressure, with maximum psi ranging from 65 to 90 across models.

Design Features:

Thrust bearings isolate the motor in all orientations.
Gears run on low friction, high strength bearing sleeves.
Tool steel pins in each stage carrier enhance durability.

Additional Features:

Sliding straight reaction arm and multi-position handle for ergonomic use.
Adjustable lubricator for proper air tool oil drip.
Ergonomic frame with hose storage, available in safety yellow.

Contact Information: TorcUP, 1025 Conroy Place, Easton, PA 18040 USA. Toll-Free: 1-888-TorcUP-1, Telephone: 1-610-250-5800, Fax: 1-610-250-2700.

Note: TorcUP products are subject to continual development, and specifications may change without prior notice.

Catalog excerpts

Pneumatic Torque Wrench - RAPTOR RP Series-2

THE WRENCH WITH BALANCE The Power Inside 1. Hardened alloy steel for durability and long cycle life 2. Bearings support the loads experienced at the square drive 3. Multi-stage planetary gear systems with optimized tooth design 4. Smooth ball bearing rotation of the gearbox housing independent from the motor handle 5. Lightweight aluminum handle with durable, slipresistant textured coating 6. Ultra-efficient air motor designed for easy maintenance 7. Cartridge-style valves provide easy replacement 8. One finger trigger control for forward and reverse 9. O-rings seal grease in while keeping water...

Open the catalog to page 2

Pneumatic Torque Wrench - RAPTOR RP Series-3

RP-500 single speed Torque range 78-530 FT/LBS Free speed 16.5-44 RPM RP-1000 single speed Torque range 148-1030 FT/LBS Free Speed 7-15 RPM RP-2000 single speed Torque range 231-2015 FT/LBS Free speed 3.5-9 RPM RP-3000 single speed Torque range 484-3070 FT/LBS Free speed 1.75-4 RPM RP-6000 single speed Torque range 714-5990 FT/LBS Free speed 1.25-3 RPM Requirements: Air Pressure 10-90 psi - Flow 45-55 CFM POWER ENGINEERED MODEL NUMBER SQUARE DRIVE MIN. TORQUE (ft/lbs) MAX. TORQUE (ft/lbs) MIN. TORQUE (nm) MAX. TORQUE (nm) HEIGHT A (in) HEIGHT A (mm) SQUARE DRIVE B (in) SQUARE DRIVE B (mm) LENGTH...

Open the catalog to page 3

Pneumatic Torque Wrench - RAPTOR RP Series-4

series pneumatic torque wrench SPEED - we REVOLUTIONize through efficiency! WEIGHT - We cut weight without sacrificing durability! STRENGTh - We know how to make alloys perform! sliding straight reaction arm straight reaction arm F/R/L Unit long Extended reaction arm multi position handle Nose Extension RP-F/R/L Control torque output Air pressure measured with PSI/ BAR liquid filled gauge Worldwide Headquarters 1025 Conroy Place Easton, PA 18040 USA TOLL FREE: 1-888-TorcUP-1 TELEPHONE: 1-610-250-5800 FAX: 1-610-250-2700 carrying case Adjustable lubricator for proper “Air Tool Oil” drip. Ergonomic...

Open the catalog to page 4