Catalogs >
TOPWAY LCD >
HMT101ATA-C

HMT101ATA-C
33Pages

Catalog excerpts

HMT101ATA-C LCD Module User Manual Release Date - Preliminary release - Add Highlight Description www.topwaydisplay.com www.topwaysz.com Document Name: HMT101ATA-C-Manual-Rev0.2.doc Page: 1 of 13

Open the catalog to page 1

LCD Module User Manual www.topwaydisplay.com www.topwaysz.com Document Name: HMT101ATA-C-Manual-Rev0.2.doc Page: 2 of 13

Open the catalog to page 2

LCD Module User Manual 1. Basic Specification TOPWAY HMT101ATA-C is a Smart TFT Module with 32bit MCU on board. Its graphics engine provides numbers of outstanding features. It supports TOPWAY TML 3.0 for preload and pre-design display interface that simplify the host operation and development time. Suitable for industry control, instrumentation, medical electronics, power electric equipment applications. General Specification Screen Size(Diagonal) : Resolution : Color Depth : Pixel Configuration : Display Mode : Viewing Direction : Outline Dimension : Active Area : Backlight : Surface...

Open the catalog to page 3

LCD Module User Manual Terminal Function UART Interface Terminal (K1) Descriptions Power supply Request To Send (function as busy BUSY signal) 1：Busy；0：No busy Data output Data Input Ground, (0V) Note. *1. User data and commands transfer through this terminal *2. HW hand shake is suggested Power supply USB DATA negative signal USB DATA positive signal USB_ID,1:Client,0:HOST Ground, (0V) Note. *1. TML files and image files preload through this terminal. *2. Do NOT connect USB terminal ,while VDD(K1) is present. www.topwaydisplay.com www.topwaysz.com Document Name:...

Open the catalog to page 4

LCD Module User Manual 2. Absolute Maximum Ratings Items Power Supply voltage Operating Temperature Storage Temperature Condition No Condensation No Condensation Note: *1. This rating applies to all parts of the module and should not be exceeded. *2. The operating temperature only guarantees operation of the circuit. The contrast, response speed, and the other specification related to electro-optical display quality is determined at the room temperature, TOP=25℃ *3. Ambient temperature when the backlight is lit (reference value) *4. Any Stresses exceeding the Absolute Maximum Ratings may...

Open the catalog to page 5

LCD Module User Manual Basic Operation Function Descriptions TML files Picture files ICONS files UART interface Custom Memories touch panel Control and Draw Engine TML files, Picture files, ICON files are stored inside FLASH memory area. They are preloaded to HMT101ATA-C for stand alone interface use. Those files are preloaded via USB interface as an USB drive. All the interface flow and the touch response are based on the preloaded TML files VP variables memory is inside RAM area, it provides real time access via UART by the HOST or display onto the TFT by TML file. Custom Memories are...

Open the catalog to page 6

LCD Module User Manual Quick Start Guide Install TOPWAY Graphics Editor Import pictures 2. design UI flow Connect to host Show 5. real time data 5. Command Descriptions Please refer to “SMART LCD Command Manual” . www.topwaydisplay.com www.topwaysz.com Document Name: HMT101ATA-C-Manual-Rev0.2.doc Page: 7 of 1

Open the catalog to page 7

LCD Module User Manual 6. Optical Characteristics Item View Angles Contrast Ratio Response Time Blue Uniformity NTSC Luminance 1. The ambient temperature is 25℃. 2. The test systems refer to Note 1 and Note 2. www.topwaydisplay.com www.topwaysz.com

Open the catalog to page 8

LCD Module User Manual Note 1: The data are measured after LEDs are turned on for 5 minutes. LCM displays full white. The brightness is the average value of 9 measured spots. Measurement equipment SR-3A (1° ) Measuring condition: - Measuring surroundings: Dark room - Measuring temperature: Ta=25℃. - Adjust operating voltage to get optimum contrast at the center of the display. Note 3: The definition of contrast ratio (Test LCM using SR-3A (1° )): Luminance When LCD is at “White” state Contrast = Ratio(CR) Luminance When LCD is at “Black” state (Contrast Ratio is measured in optimum common...

Open the catalog to page 9

LCD Module User Manual 7. LCD Module Design and Handling Precautions Please ensure V0, VCOM is adjustable, to enable LCD module get the best contrast ratio under different temperatures, view angles and positions. Normally display quality should be judged under the best contrast ratio within viewable area. Unexpected display pattern may com out under abnormal contrast ratio. Never operate the LCD module exceed the absolute maximum ratings. Never apply signal to the LCD module without power supply. Keep signal line as short as possible to reduce external noise interference. IC chip (e.g. TAB...

Open the catalog to page 10

LCD Module User Manual dropping from high place) will damage the LCD module. Protective film is attached on LCD screen. Be careful when peeling off this protective film, since static electricity may be generated. Polarizer on LCD gets scratched easily. If possible, do not remove LCD protective film until the last step of installation. When peeling off protective film from LCD, static charge may cause abnormal display pattern. The symptom is normal, and it will turn back to normal in a short while. LCD panel has sharp edges, please handle with care. Never attempt to disassemble or rework LCD...

Open the catalog to page 11

LCD Module User Manual 8.3 Additional Cover Lens Mounting (Figure 3) - For the case of additional cover Lens mounting, it is necessary to recheck with the CTP specification about the material and thickness to ensure the functionality. - It should keep a 0.2~0.3mm gap between the cover lens and the CTP surface.. - The cover lens window should be bigger than the active area of the CTP.It should be≥0.5mm each side. - It is recommended to provide an additional support bracket for backside support when necessary (e.g. slim type TFT module without mounding structure). They should only provide...

Open the catalog to page 12

LCD Module User Manual Warranty This product has been manufactured to our company’s specifications as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear power control equipment, aerospace equipment, fire and security systems, or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. If the product is to...

Open the catalog to page 13

HMT101ATA-C 33Pages

Catalog excerpts

All TOPWAY LCD catalogs and technical brochures

HMT101ATA-C
33Pages