Catalog excerpts
HMT070ATA-1C LCD Module User Manual Release Date - Preliminary Draft release - Add 5 Optical Characteristics - Delete Interface Terminal (K1) - Update section 3.1 - Add Highlight Description www.topwaydisplay.com www.topwaysz.com Document Name: HMT070ATA-1C-Manual-Rev0.4.doc Page: 1 of 12
Open the catalog to page 1LCD Module User Manual www.topwaydisplay.com www.topwaysz.com Document Name: HMT070ATA-1C-Manual-Rev0.4.doc Page: 2 of 12
Open the catalog to page 2LCD Module User Manual 1 Basic Specification TOPWAY HMT070ATA-1C is a Smart TFT Module with 32bit MCU on board. Its graphics engine provides numbers of outstanding features. It supports TOPWAY TML 3.0 for preload and pre-design display interface that simplify the host operation and development time. Suitable for industry control, instrumentation, medical electronics, power electric equipment applications. General Specification Screen Size(Diagonal) : Resolution : Color Depth : Pixel Configuration : Display Mode : Viewing Direction : Outline Dimension : Active Area : Backlight : Command I/F:...
Open the catalog to page 3LCD Module User Manual Terminal Function RS232 Interface Terminal (K8) Pin No. Pin Name I/O 1,2 3 Descriptions Power supply (6.0~26.0 V) Request To Send (could function as busy BUSY signal) (eg. to PC’s RS-232C pin8 <9pin D-connector>) Data output (eg. to PC’s RS-232C pin2<9pin D-connector>) Data Input (eg. to PC’s RS-232C pin3 <9pin D-connector>) Ground, (0V) Note. *1. User data and commands transfer through this terminal. *2. HW hand shake is suggested. USB Interface Terminal (K2) Pin No. Pin Name I/O 1 2 3 4 5 Descriptions Power supply(5.0 V) USB DATA negative signal USB DATA positive...
Open the catalog to page 4LCD Module User Manual Items Symbol Operating Voltage VDD RxD Input MARK(1) VRxDM RxD Input SPACE(0) VRxDS TxD Output MARK(1) VTxDM TxD Output SPACE(0) VTxDS RTS(BUSY) Output High VTxDH RTS(BUSY) Output Low VTxDL Operating Current IDD Operating Current (USB) IVUSB Battery Supply Current IBAT Note. *1. Normal display condition VSS=0V, VDD=12.0V,TOP =25C Unit Applicable Pin/FUNC V VDD V RxD V RxD V TxD V TxD V RTS(BUSY) V RTS(BUSY) mA VDD (*1) mA VUSB uA (*2) AC Characteristics JP1,JP7=close, Items Start bit Data bit Parity bit Stop bit Baud Rate(*1) Items Serial Data Flow Control JP3=close,...
Open the catalog to page 5LCD Module User Manual Function Specifications Basic Operation Function Descriptions TML files Picture files ICONS files UART interface Custom Memories Touch Panel Control and Draw Engine TML files, Picture files, ICON files are stored inside FLASH memory area. They are preloaded to HMT070ATA-1C for stand alone interface use. Those files are preloaded via USB interface as an USB drive. All the interface flow and the touch response are based on the preloaded TML files VP variables memory is inside RAM area, it provides real time access via UART by the HOST or display onto the TFT by TML...
Open the catalog to page 6LCD Module User Manual Quick Start Guide Install TOPWAY Graphics Editor Import pictures 2. design UI flow Connect to host Show 5. real time data Command Descriptions Please refer to “SMART LCD Command Manual”. www.topwaydisplay.com www.topwaysz.com Document Name: HMT070ATA-1C-Manual-Rev0.4.doc Page: 7 of 1
Open the catalog to page 7LCD Module User Manual 5 Optical Characteristics Item Contrast ratio Color chromaticlty Luminance Luminance uniformity Note: *1. Definition of Contrast Ratio The contrast ratio could be calculate by the following expression: Contrast Ratio (CR) = Luminanc with all pixels white / Luminance with all pixels black *2 Definition of Viewing Angle *3 Definition of response time www.topwaydisplay.com www.topwaysz.com *4 Definition of Luminance Uniformity Luminance uniformity (Lu)= Min. Luminance form pt1~pt9 / Max Luminance form Pt1~pt9
Open the catalog to page 8LCD Module User Manual 6 LCD Module Design and Handling Precautions Please ensure V0, VCOM is adjustable, to enable LCD module get the best contrast ratio under different temperatures, view angles and positions. Normally display quality should be judged under the best contrast ratio within viewable area. Unexpected display pattern may com out under abnormal contrast ratio. Never operate the LCD module exceed the absolute maximum ratings. Never apply signal to the LCD module without power supply. Keep signal line as short as possible to reduce external noise interference. IC chip (e.g. TAB...
Open the catalog to page 9LCD Module User Manual Protective film is attached on LCD screen. Be careful when peeling off this protective film, since static electricity may be generated. Polarizer on LCD gets scratched easily. If possible, do not remove LCD protective film until the last step of installation. When peeling off protective film from LCD, static charge may cause abnormal display pattern. The symptom is normal, and it will turn back to normal in a short while. LCD panel has sharp edges, please handle with care. Never attempt to disassemble or rework LCD module. If display panel is damaged and liquid...
Open the catalog to page 10LCD Module User Manual 7.3 Additional Cover Lens Mounting (Figure 3) - For the case of additional cover Lens mounting, it is necessary to recheck with the CTP specification about the material and thickness to ensure the functionality. - It should keep a 0.2~0.3mm gap between the cover lens and the CTP surface.. - The cover lens window should be bigger than the active area of the CTP.It should be≥0.5mm each side. - It is recommended to provide an additional support bracket for backside support when necessary (e.g. slim type TFT module without mounding structure). They should only provide...
Open the catalog to page 11LCD Module User Manual In general design, RTP V.A. should be bigger than the TFT V.A. and RTP A.A. should be bigger than the TFT A.A. (Figure 5) 通常设计时: RTP的可视区 V.A. 应不小于TFT 的可视区 V.A. 及RTP的动作区 A.A. 应不小于TFT 的动作区 A.A. (附图5) Warranty This product has been manufactured to our company’s specifications as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear power control equipment,...
Open the catalog to page 12All TOPWAY LCD catalogs and technical brochures
-
10.1" TFT LCD Module
1 Pages
-
MONO Product
2 Pages
-
LMT050DNCFWU-NNA-2
15 Pages
-
LMT080TDGP01
16 Pages
-
HKT035BTB-1D
36 Pages
-
HMT050AMC-C
17 Pages
-
HMT043ATA-6C
31 Pages
-
TM035PDHG09
42 Pages
-
TM035PDHG03
31 Pages
-
TM028HDZP01
28 Pages
-
LM256160DCW-1
14 Pages
-
LM12896FCW-1
17 Pages
-
LM12832KCW
13 Pages
-
LM2088EFW-9
12 Pages
-
LM3122AGG-2
12 Pages
-
LM240160YCW
18 Pages
-
LM6093ACW
14 Pages
-
HMT104ATA-C
11 Pages
-
HMT101ATA-D
36 Pages
-
HKT080ATA-C
1 Pages
-
HMT080ATA
1 Pages
-
HKT070DTA-1C
11 Pages
-
HMT070DTA-D
1 Pages
-
HKT070DMC-2C
19 Pages
-
HMT070ETD-C
31 Pages
-
HMT070ETD-1D
34 Pages
-
HMT056ATA-C
1 Pages
-
HMT050CB-1C
31 Pages
-
HMT050DTA-D
1 Pages
-
HKT050ATA-C
1 Pages
-
HMT043ATA-7C
32 Pages
-
HMT043GTA-1D
37 Pages
-
HKT043BMC-2C
17 Pages
-
HMT043ATA-3C
11 Pages
-
HMT043BMC-C
1 Pages
-
HMT043ATA-4C
11 Pages
-
HKT043BMC-C
1 Pages
-
HKT043ATA-1C
12 Pages
-
HMT035ATA-D
13 Pages
-
HMT028ATB-C
12 Pages
-
HKT104ATA-C
31 Pages
-
HMT068BTA-C
33 Pages
-
HMT080ATA-C
33 Pages
-
HMT090ATA-C
30 Pages
-
HMT101ATA-C
33 Pages
-
HMT050ATA-2C
31 Pages
-
HMT043ATA-2C
32 Pages
-
IC Raio RA6963 LCD Controller
42 Pages
-
IC Epson S1D13L01 LCD Controller
118 Pages
-
IC EPSON S1D13700 LCD Controller
133 Pages
-
EPSON S1D13709 LCD Controller
192 Pages
-
Samsung S6B0108 LCD Driver
23 Pages
-
Avant SBN0064G LCD Driver
37 Pages
-
Avant SBN6400G LCD Driver
34 Pages
-
EPSON SED1335 LCD Controller
95 Pages
-
SGS-THOMSON ST7282
23 Pages
-
Raio RA6963 LCD Controller
42 Pages
-
Raio RA8875 TFT LCD Controller
174 Pages
-
Raio RA8835 LCD Controller
93 Pages
-
RAIO RA8803 LCD Controller
8 Pages
-
HMT035ATA-1C
1 Pages
-
Smart LCD introduction
14 Pages
-
Topway company introduction
14 Pages
-
TFT module in bezel
1 Pages
-
Topway TFT LCD
1 Pages
-
LM12864L Series
1 Pages
-
LM12864T Series
1 Pages
-
LM12864F Series
1 Pages
-
LM6060C Series
1 Pages
-
LM12864M Series
1 Pages
-
LM6029A Series
1 Pages
-
LM6059B Series
1 Pages
-
LM24048A Series
1 Pages
-
LM13232A Series
1 Pages
-
LM160160A Series
1 Pages
-
LMB402C Series
1 Pages
-
LMB242A Series
1 Pages
-
LMB204C Series
1 Pages
-
LM3121 Series
1 Pages
-
LMB404A Series
1 Pages
-
HMT043FC-1C
1 Pages
-
LM3123 Series
1 Pages
-
LMB204B Series
1 Pages
-
LMB202E Series
1 Pages
-
LMB202D Series
1 Pages
-
LMB164A Series
1 Pages
-
LMB162G Series
1 Pages
-
LMB162H Series
1 Pages
-
LMB162N Series
1 Pages
-
LMB162A Series
1 Pages
-
LMB0820D Series
1 Pages
-
LMB0820C Series
1 Pages
-
LMB0820A Series
1 Pages
-
LMB081N Series
1 Pages
-
LMB081A Series
1 Pages
-
LMB162X series
1 Pages
-
LMT057DNAFWU-AAN series
1 Pages
-
LMT057DNAFWU-AAA series
1 Pages
-
LMT104SDH01 Series
1 Pages
-
TOPWAY Product List (Y2012)
4 Pages
-
TFT LCD module
1 Pages
-
Without controller
1 Pages
-
Chinese fonts
1 Pages
-
Built-in controller
1 Pages
-
Character module
1 Pages