Catalogs >
TOPWAY LCD >
HMT043ATA-6C

HMT043ATA-6C
31Pages

Add to favorites

Catalog excerpts

HMT043ATA-6CLCD Module User Manual Prepared by: Document Name: HMT043ATA-6C-Manual-Rev0.3.doc Page: 1 of 11

Open the catalog to page 1

LCD Module User Manual Document Name: HMT043ATA-6C-Manual-Rev0.3.doc Page: 2 of 11

Open the catalog to page 2

TOPWAY LCD Module User Manual HMT043ATA-6C 1 Basic Specification TOPWAY HMT043ATA-6C is a Smart TFT Module with 32bit MCU on board. Its graphics engine provides numbers of outstanding features. It supports TOPWAY RGTools for preload and pre-design display interface that simplify the host operation and development time. Suitable for industry control, instrumentation, medical electronics, power electric equipment applications. 1.1 General Specification Screen Size(Diagonal): Resolution : Color Depth : Pixel Configuration : Display Mode : Viewing Direction : Outline Dimension : Active Area :...

Open the catalog to page 3

TOPWAY LCD Module User Manual HMT043ATA-6C Note. *1. TML files and image files preload through this terminal Document Name: HMT043ATA-6C-Manual-Rev0.3.doc Page: 4 of 11

Open the catalog to page 4

TOPWAY LCD Module User Manual HMT043ATA-6C Note. *1.Baud Rate (1200bps~ 115200bps) could be adjusted by software. Document Name: HMT043ATA-6C-Manual-Rev0.3.doc Page: 5 of 11

Open the catalog to page 5

LCD Module User Manual Basic Operation Function Descriptions HMT043ATA-6C TML files Picture files ICONS files UART interface Custom Memories Touch Panel VP variables Control and Draw Engine TML files, Picture files, ICON files are stored inside FLASH memory area. They are preloaded to HMT043ATA-6C for stand alone interface use. Those files are preloaded via USB interface as an USB drive. All the interface flow and the touch response are based on the preloaded TML files VP variables memory is inside RAM area, it provides real time access via UART by the HOST or display onto the TFT by TML...

Open the catalog to page 6

LCD Module User Manual Quick Start Guide Install TOPWAY Graphics Editor Import pictures 2. design UI flow Connect to host Show 5. real time data 4.3 Command Descriptions Please refer to “TOPWAY SMART LCD Command Manual” or later. Document Name: HMT043ATA-6C-Manual-Rev0.3.doc Page: 7 of 1

Open the catalog to page 7

LCD Module User Manual 6 LCD Module Design and Handling Precautions - Please ensure V0, VCOM is adjustable, to enable LCD module get the best contrast ratio under different temperatures, view angles and positions. Normally display quality should be judged under the best contrast ratio within viewable area. Unexpected display pattern may come out under abnormal contrast ratio. Never operate the LCD module exceed the absolute maximum ratings. Keep signal line as short as possible to reduce external noise Never apply signal to the LCD module without power supply. IC chip (e.g. TAB or COG) is...

Open the catalog to page 8

LCD Module User Manual Only clean LCD with a soft dry cloth, Isopropyl Alcohol or Ethyl Alcohol. Other solvents (e.g. water) may damage the LCD. Never add force to components of LCD module. It may cause invisible damage or degrade the module's reliability. When mounting LCD module, please make sure it is free from twisting, warping and bending. Do not add excessive force on surface of LCD, which may cause the display color change abnormally. LCD panel is made with glass. Any mechanical shock (e.g. dropping from high place) will damage the LCD module. Protective film is attached on LCD...

Open the catalog to page 9

LCD Module User Manual It is recommended to provide an additional support bracket with gasket for backside support when necessary (e.g. TFT module without mounding structure). They should only provide appropriate support and keep the module in place. The mounting structure should be strong enough to prevent external uneven force or twist act onto the module Figure 2 7.3 Additional Cover Lens Mounting (Figure 3) - For the case of additional cover Lens mounting, it is necessary to recheck with the CTP specification about the material and thickness to ensure the functionality. - It should keep...

Open the catalog to page 10

LCD Module User Manual In general design, RTP V.A. should be bigger than the TFT V.A. and RTP A.A. should be bigger than the TFT A.A. (Figure 5) 通常设计时： RTP 的可视区 V.A. 应不小于 TFT 的可视区 V.A. 及 RTP 的动作区 A.A. 应不小于 TFT 的动作区 A.A. (附图 5) Warranty This product has been manufactured to our company’s specifications as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear power control...

Open the catalog to page 11

SMART LCD Command V5.04 Manual Prepared by: Document Name:SMART LCD Command v5.04 Manual Rev0.4.doc Page: 1 of 19

Open the catalog to page 12

TOPWAY SMART LCD Command Manual Protocol V5.04 Document Name:SMART LCD Command v5.04 Manual Rev0.4.doc Page: 2 of 19

Open the catalog to page 13

TOPWAY SMART LCD Command Manual Protocol V5.04 1 Basic Specifications TOPWAY Smart LCD serial command is for real-time control and access. Host machine get the data which input through the Smart LCD interface or provide the data for display. 1.1 Hardware connection Smart LCD serial UART interface are mainly base on RS232-C standard, by default, config as 8N1 115200bps. Note. *1. Packet Acknowledgement response to a valid packet only. Document Name:SMART LCD Command v5.04 Manual Rev0.4.doc Page: 3 of 19

Open the catalog to page 14

TOPWAY SMART LCD Command Manual Protocol V5.04 3 Data arrangement 3.1 Color Data Value Configuration 16 bit Color value 3.2 Data / Address / Page_ID / Location Values Configuration 64bit value_ 16bit value_ 16 bit number value D15...D8 D7...D0 High Byte (MSB) Low Byte (LSB) Document Name:SMART LCD Command v5.04 Manual Rev0.4.doc Page: 4 of 19

Open the catalog to page 15

TOPWAY SMART LCD Command Manual Protocol V5.04 Document Name:SMART LCD Command v5.04 Manual Rev0.4.doc Page: 5 of 19

Open the catalog to page 16

TOPWAY SMART LCD Command Manual Protocol V5.04 4.2 Config/ Status Function Commands Details Response code: Note. *1. The Response code with communication packet format (see Communication Packet Structure Section for details) Note. *1. Command should be transferred in communication packet structure (see Communication Packet Structure Section for details) Note. *1. The Response code with communication packet format (see Communication Packet Structure Section for details) Document Name:SMART LCD Command v5.04 Manual Rev0.4.doc

Open the catalog to page 17

HMT043ATA-6C 31Pages

Catalog excerpts

All TOPWAY LCD catalogs and technical brochures

HMT043ATA-6C
31Pages