Catalogs >
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED >
TS5 solar dc circulation pump

TS5 solar dc circulation pump
3Pages

Catalog excerpts

SOLAR DC CIRCULATION PUMP Features ◇DC brushless motor with energy ef ciency technology by micro processor ◇Soft start at very low in-rush current, good convenient working directly with PV panel ◇ Durable permanent magnetic rotor/impeller and ne ceramic shaft ◇ Advanced magnetic drive technology for static-impeller, without any leakage for ever ◇ Long life brushless pump, ideal life for 30000 hours ◇ Heavy duty work, can sustain continual 24 hours' Speci cations Voltage: 8V~24V DCStandard:12V DC work ◇ Automatic overload protection ◇ Automatic over-temperature protection ◇ Automatic dry-running protection ◇ Low or no maintenance ◇ Low power consumption Max Flow Rate: 12 L/Min Max Water Head: 3M Inlet/Outlet: Brass(or Stainless steel)1/2" BSP/NPT male Max system pressure: 10Bar Max working temperature: 110°C (230° F) Areas of use Min start-up power consumption less than 2 Watt Hot Water Circulation Low noise: ≤45dB far from 1m distance Radiant Floor Heating Solar Applications Beer Brewing Liquid Transfer General Purpose Pumping Application The TS5 solar DC pump can be used for most circulation pump applications without connection to the power grid. Highly ef cient, the TS5 can be connected directly to a photovoltaic panel and is characterized by its small size, high ef ciency, and extreme low power consumption. The long life brushless motor technology provides maintenance free and quiet service life. This pump is perfect for single family home thermal solar systems or any circulation pump application where conventional power is not available.

Open the catalog to page 1

SOLAR DC CIRCULATION PUMP Soft start-up The TS5 Solar DC pump has a soft start-up feature which reduces high in-rush current. When the photovoltaic panel provides sufficient power, the pump goes through the alignment phase by turning the rotor into the position required for start-up. The processor then waits until the capacitor is sufficiently charged. This enables a start-up with minimal power (less than two watt). Cycling due to unsuccessful attempts is minimized. Even after prolonged shutdown, the pump will start Materials of Construction (Wetted Parts) •Hi-Temp Ryton Plastic- PPS (food...

Open the catalog to page 2

SOLAR DC CIRCULATION PUMP TS5 mainly compare with domestic most ordinary DC hot water pumps, D5 pump and SID pump Max Wide Over-load Ceramic Ferrite Magn NdFeB magnet Ceramic Ferrite Magnet Ceramic Ferrite Magnet /Outlet Scope Ryton (PPS): one of best engineering plastics, can stead of metal material in many eld, with a high mechanical strength, high temperature, chemical properties of advantages such as; have a thermal stability, excellent heat resistance, high mechanical strength, its continuous use temperatures up to 220-240℃, at 1.82MPa load heat distortion temperature of above 260℃....

Open the catalog to page 3

TS5 solar dc circulation pump 3Pages

Catalog excerpts

All TOPSFLO INDUSTRY AND TECHNOLOGY CO. catalogs and technical brochures

TS5 solar dc circulation pump
3Pages