*mydirectindustry

TL-D01

Product catalog summary

Product Overview: The document provides specifications for various heating systems including gas water heaters, electric instant water heaters, gas boilers, heat pumps, radiant floor heating, and wall-hung boilers. It highlights the 'Zero Cold Water' feature for water heaters.

Specifications: The document lists detailed specifications for the Micro BLDC Pump TL-D01, including dimensions, rated voltage, flow rate, and power. The pump is designed for high efficiency, with a motor and rotor design that is 30% more efficient than similar products. It operates with low noise levels, 3-5 dB(A) lower than comparable models, and is designed to prevent leakage.

Performance Data: The performance data is measured with pure water at normal temperature. The maximum flow rate is specified for a water head of 0 meters, and the highest lift is noted when water flow is 0 L/min. The noise level is ≤42dB(A), and the pump operates in a continuous mode with an IP66 protection level and Class F coil insulation.

Environmental Conditions: The pump is suitable for ambient temperatures ranging from 0°C to 40°C and liquid temperatures from -40°C to 100°C. It is crucial that the pumps are not run dry and must be in a continuous flooded suction environment.

Customization Options: Customization options include PWM or 5V speed control and FG (RPM) signal wire.

Contact Information: The document provides contact details for TOPS Industry and Technology (Micro Pump & Motor) Co., Ltd., including email, phone, and WeChat/WhatsApp contact.

Catalog excerpts

Micro BLDC Pump • “Zero Cold Water” Water Heater • Electric Instant Water Heater • Heating System, Gas Boiler • Heat Pump • Radiant Floor Heating, Wall-hung Boiler • Large flow, high water head, high pressure • High-efficiency motor and rotor design, 30% higher efficiency than similar products • Low noise, 3~5dB(A) lower than similar performance • No leakage, more reliable • The data in the table is the measured performance when pure water is delivered at normal temperature. • The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min. • Working mode: Continuous • Coil Insulation class: Class F • Pumps must be in a continuous flooded suction environment. Whatsapp Wechat TOPS Industry and Technology (Micro Pump & Motor) Co.,Ltd E-mail:[email protected] Web:www.topsflo.com Phone:86-731 -82739266 Wechat/Wha

Open the catalog to page 1

TL-D01

TL-D01

Catalog excerpts

All TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED catalogs and technical brochures

Archived catalogs