*mydirectindustry

TL-B08

Product catalog summary

Overview: This document provides technical specifications and applications for the TL-B08 Food Grade DC Pump, highlighting its features, specifications, and typical applications.

Specifications:

Noise Level: ≤34dB(A), ensuring ultra-silent operation.
Certifications: FDA, NSF food grade, WRAS certified.
Size and Weight: Compact and lightweight design.
Power Efficiency: Ultra-low power consumption with high efficiency.
Lifespan: Long lifespan of 20,000 hours.
Speed Control: Intelligent speed control with customization options for PWM speed control and FG (RPM) signal wire.
Performance: Maximum flow rate is achieved when the water head is 0 meters, and the highest lift is when water flow is 0 L/min.
Working Mode: Continuous operation.
IP Level: IP67, ensuring protection against dust and water.
Coil Insulation Class: Class F.
Temperature Range: Ambient temperature from -40°C to 40°C; Liquid temperature from -40°C to 70°C.
Operational Requirement: Pumps must not run dry and should be in a continuous flooded suction environment.

Typical Applications:

Liquid-cooled superchargers
Water chiller and cooling circulation systems
Battery cooling systems
Gene sequencers
Automotive air conditioning systems
Air conditioning drainage
3D laser printer cooling
Heat pump water heater tank water circulation

Performance Data: The document includes performance data measured with pure water at normal temperature, detailing flow rates and head measurements under various conditions.

Catalog excerpts

TL-B08 Food Grade DC Pump (€ I H I REACH I IfS^ I @ I WMS Typical Applications • Liquid-cooled Superchargers • Water Chiller, Cooling Circulation System • Battery Cooling System • Gene Sequencer • Automotive Air Conditioning System • 3D Laser Printer Cooling • Heat pump water heater tank water circulation • FDA, NSF food grade, WRAS certified • Compact size, light weight • Ultra-low power, high efficiency • Long lifespan 20000 hours • Intelligent speed control • The data in the table is the measured performance when pure water is delivered at normal temperature. • The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min. • Working mode: Continuous • Coil Insulation class: Class F • Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction Customization: 1. /PWM speed control 2. /FG (RPM) signal wire

Open the catalog to page 1

TL-B08

TL-B08

Catalog excerpts

All TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED catalogs and technical brochures

Archived catalogs