Medical Equipment Water Pump Micro DC Brushless Water Pump TL-C01

Product catalog summary

Overview: This document provides technical specifications and features of the TL-C01 series Micro DC Brushless Pumps, which are used in various applications such as water heater recirculating systems, cooling circulation systems, and medical equipment.

Specifications:

Rated Voltage: Available in 12VDC and 24VDC models.
Flow Rate: Maximum flow rate is achieved when the water head is 0 meters.
Max Water Head: The highest lift is when water flow is 0 L/min.
Noise Level: ≤40dB(A).
Operating Temperature: Continuous operation up to 75°C, intermittent up to 100°C.
IP Level: IP68, ensuring protection against dust and water.
Coil Insulation: Class F.
Ambient Temperature: -40°C to 40°C.
Liquid Temperature: -40°C to 75°C (continuous), 100°C (intermittent).

Features:

Large flow rate and high pressure.
No leakage, ensuring reliability.
Long working life of 20,000 hours.
Super quiet operation at 40dB(A).
Intelligent control options available.

Customization Options:

PWM or 5V speed control.
FG (RPM) signal wire.
Submersible option for liquids ≤50°C.

Performance Data:

Performance curves are provided for different models, showing flow rate versus head.
Dimensions and design details are specified for standard version pumps C, D, and E.

Important Notes:

Pumps should not be run dry and must be in a continuous flooded suction environment.

Catalog excerpts

Medical Equipment Water Pump Micro DC Brushless Water Pump TL-C01-1

TL-С01 Micro DC Brushless Pump Typical Applications Water Heater Recirculating System Electric Instant Water Heater “Zero cold water” water heater Cooling Circulation System, Chiller Heating System, Gas Boiler Carbonated Beverage Machine Boosting Applications Medical Equipment General Purpose Pumping Large ow rate, high pressure No Leakage, more reliable 20,000 hours long working life 40dB(A), super quiet Intelligent control Specication At Max Efciency Point Product Code Max Water Flow (L/min) Rated Power(W) Rated Spec. (L/min @ M) Customization: 1. /PWM or /5V speed control The data in the table is the measured performance when pure water is delivered at normal temperature. The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min. Noise≤40dB(A) Working mode: Continuous operation under 75°C liquid temperature, 100°C intermittent operation 3. /S Submersible, liquid≤50 °C IP level:IP68 Coil Insulation class:Class F Ambient temperature: -40 °C ~40 °C Liquid temperature: -40 °C ~ 75°C (continuous ), 100°C (interupt) Do Not Run Pumps Dry. Pumps must be in a continuous flooded

Open the catalog to page 1

Medical Equipment Water Pump Micro DC Brushless Water Pump TL-C01-2

TL-С01 Micro DC Brushless Pump Note: pump A / B / TC lead wire pls refer to C / D / E type pump Standard Version Pump C Standard Version Pump D Standard Version Pump E TOPS Industry and Technology (Micro Pump & Motor) Co.,Ltd E-mail:[email protected] Web:www.topsflo.com Phone:86-731-82739266 Wechat/Whatsap

Open the catalog to page 2