Electric Vehicle Charging Pile Cooling Pump TA60

Product catalog summary

Product Specifications:
The document provides specifications for the TA60 and TA50 series micro BLDC pumps. Key specifications include:

Rated Voltage: 12VDC and 24VDC
Rated Flow: 2.5 L/min and 4.5 L/min
Max Water Head: 9 meters
Max Water Current: 8.5A
Rated Power: 54W and 60W

Customization options include PWM speed control and FG (RPM) signal wire.

Performance and Operation:
The pumps are designed for continuous operation at liquid temperatures up to 90°C and intermittent operation up to 100°C. They feature a noise level of ≤50dB(A) and are equipped with a shock-proof installation bracket. The pumps must operate in a continuous flooded suction environment and should not run dry.

Environmental and Safety Standards:
The pumps have an IP68 rating for dust and water resistance and a coil insulation class of H. They can operate in ambient temperatures ranging from -45°C to 70°C continuously, and up to 80°C intermittently. Liquid temperature operation ranges from -45°C to 90°C continuously, and up to 100°C intermittently.

Applications:
The pumps are suitable for various applications including car engine pre-heating, HVAC circulation systems, electric vehicle inverter and battery cooling systems, and automobile engine cooling circulation.

Features:
The TA60 micro BLDC pump is resistant to extreme temperatures, with a long working life of 20,000 hours. It operates over a wide voltage range of 6-28V and is highly resistant to dust and water.

Catalog excerpts

Electric Vehicle Charging Pile Cooling Pump TA60-1

Typical Applications Micro BLDC Pump Car Engine Pre-heating Heating System (Car Auxiliary Heaters, Parking Heaters) HVAC Circulation Systerm Electric Vehicles Inverter Cooling System Electric Vehicles Charging Pile Cooling Automobile engine cooling Circulaton Electric Vehicles Battery Cooling System Features Resistant to extreme low temperature starting at -45°C and high temperature resistant to 100°C 20,000 hours long working life Achieves high dust and water resistance rating IP68 6-28V wide voltage operation Product Code Max Water Flow (L/min) Customization: 1. /PWM speed control Rated Spec. (L/min @ M) The data in the table is the measured performance when pure water is delivered at normal temperature. The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min. Noise≤50dB(A) Working mode:Continuous operation under 90°C liquid temperature, 100 °C intermittent operation IP level:IP68 Coil Insulation class:Class H Ambient temperature: -45 °C ~70 °C (continuous ), 80°C ( interupt ) Liquid temperature: -45 °C ~90 °C (continuous ), 100°C ( interupt ) Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Curve & Dimension Curve Rated Power(W) 35 37 Shock-proof installation bracket TOPS Industry and Technology (Micro Pump & Motor) Co.,Ltd E-mail:[email protected] Web:www.topsflo.com Phone:86-731-82739266 Wechat/Whatsapp:

Open the catalog to page 1