Brochure Tilting handling systems
12Pages

watch our catalogue online turning your world STATIONARY / INLINE TOPPY V-SHAPE • TOPPY L-SHAPE • TOPPY Q-SHAPE TOPPY INVERTER • TOPPY L-SHAPE SILVER • TOPPY STACKER Tilting Pallet Changer

V-SHAPE TECHNICAL FEATURES TOPPY V-SHAPE Pallet size Capacity Max Opening Operational Load Performance Power * stainless steel version Up to 1200x1200 mm opened or bottom closed pallet Up to 2000 kg Up to 2500mm Available both on manual or automatic versions At floor level by pallet jack or forklift About 30 pallets / hour 400 V (VAC) – 50Hz, 3PHs + Ground upon request Toppy V-Shape can securely handle various type of load used in several fields of application as pharmaceutical, food, cosmetic and for various other products like bags, boxes, phials, bottles, big bags and cans. First of all...

V-SHAPE upon request SLIP SHEET HOLDER Allows to handle slip-sheets placed between product and pallet. Two different versions are available, first one permits to transfer existing slip-sheet on the destination pallet. Second one allows slip-sheet introduction between product and destination pallet. SONAR CENTERING SYSTEM Allows to place the destination pallet under the product in a centered position, regardless the initial position on the origin pallet. Highly recommended for logistic lines application and for high bay warehouses for a secured storage. special versions RESET & START SYSTEM...

Toppy V Shape i-Beetle consists of a „V-Shape“ pallet changer, with two, in a line arranged, pallet stackers and a micro-shuttle transporter. The micro-shuttle supplies the system with new pallets and takes the old pallets on and gives these off. Thanks to a fully automatic sonar centering, the product always sits in the middle of the pallet. In addition, the pallet warehouses need to be fed with pallets in very good conditions, high quality and, therefore, high cost. Many companies use the same good pallets for the transport of their products, which results in a material and economical...

Toppy V Shape Logy tilts the load backwards at 120° allowing a gentle and save pallet replacement. Its configuration allows the machine to exchange pallets and securely handle a huge variety of products including loads of bags, boxes, drums, bottles, etc. The Toppy V Shape is fast and strongly designed for a 24/7 operation. Toppy V Shape in line pallet exchanger version can be supplied complete of roll or chain conveyor ready to be integrated in logistic lines. The V Shape fully automated configuration complete of pallet stackers can guarantee the higher performance output. Its sonar...

L-SHAPE Logy Toppy L Shape Logy tilts the load backwards allowing a gentle and save pallet replacement. Two lateral side plates together with the rear platform, support the product on three sides to safety perform the pallet exchanging operation. Its configuration allows to handle a large variety of products including loads of boxes, bottles, etc. The Toppy L Shape is fast and strongly designed for a 24/7 operation. Toppy L Shape in line pallet exchanger version can be supplied complete of roll conveyor on lower platform ready to be integrated in logistic lines. The L Shape fully automated...

Q-SHAPE Logy Toppy Q Shape Logy turn the load backwards allowing a gentle and save pallet replacement. Two independent platforms and an openable side plete, together with the rear platform, support the product to safety perform the pallet exchanging operation. Its configuration allows to handle all kind of products such as bags, bis bags, drums, vials, cartons, folding boxes, bottles, rolls, etc. Depending from product and particular load/box mosaic configuration Toppy Q Shape can rotate the load at 95°, 120°, 135°, 180° exchanging angle. The Toppy Q Shape is fast and strongly designed for...

TECHNICAL FEATURES Toppy Inverter is a stationary pallet exchanger that can turn loads and exchange pallet of a maximum weight of 2000 kg and maximum height of 2600mm. Toppy Inverter is available in various configurations and options, in fact loading can be performed by forklift or pallet jack (floor level version), or there is the possibility to change the pallet at 90° (for stable goods only) instead of 180°. Their diversity makes them suitable for any kind of industry such as food, pharmaceutical, cosmetics and ceramics companies. Toppy Inverter is available both in manual version or in...

upon request ANTI CRUSH SYSTEM Additional photocells which automatically detect the product and stop platform closing movement in order to prevent any product damage. COLD PACK Special components able to resist at subzero temperatures. Different kits are available depending on different environment conditions. PALLET HOLDER Available on single or both platforms, able to hang the pallet on the machine itself for customized use. RESET & START SYSTEM Composed by ropes or pendant station to run the machine without getting off from the forklift. floppy Inverter stainless steel Aisi 304

INVERTER IN LINE Toppy Inverter is a stationary pallet turner provided with two roll conveyors one on each platform. Rotations and lifting are obtained by hydraulic system. This system works 40 pallet / hour with one size of pallet, to which have to be added the time to change the pallet size, that is 80 seconds (example: from 800×1200 mm to 1000×1200 mm and vice versa).

TOPPY GRAVITY ditpemer Toppy Gravity pallet Stacker and De-Stacker is a new ecofriendly pallet organizer concept for releasing & storing pallets. Free energy operating, no need of electrical power connection or compressed air, just working using gravity force for a greater time and space saving. Avoid manual pallet handling, reducing profession illness. Recommended to improve work environment, eliminate operator occupational disease, designed for the smallest possible space covered, easy usage for a performance increase and optimazed pallet process flow. PATENTED TOPPY DESIGN. L-SHAPE Uam-...