PG-S1 Operating Frequency Range L1 GPS/GLONASS L2 GPS/GLONASS L-Band Gain, Noise Figure and VSWR The PG-S1 is a Topcon geodetic antenna built around patented Fence Antenna™ Technology by Topcon. This high precision micro-centered antenna with integrated ground plane provides excellent tracking sensitivity and multipath rejection for all surveying and construction applications. The PG-S1 antenna supports L1/L2 frequencies from GPS and GLONASS satellite constellations, as well as L-Band frequencies. The PG-S1 paired with any Topcon modular or handheld GNSS receiver provides a high performance RTK system. The PG-S1 antenna system offers IP67 dust and water resistance as well as superior level of vibration and shock tolerance (IEC 60068-2). With its compact and ultra-rugged design, the PG-S1 is the most robust geodetic antenna in the market today. Ar TOPCOIX For more information: topconpositioning.com/pg-s1 Specifications subject to change without notice. ©2016 Topcon Corporation All rights resemed. 7010-2091 C 2/16 LNA Gain Gain at Zenith (90°) Noise Figure 1586.5 ± 25 MHz 1236 ± 20 MHz 1535 ± 10 MHz ± 100 MHz -30 dBc (typical) ± 200 MHz -60 dBc (typical) 33 dB (typical) GPS L1 5.5 dBic (min) GPS L2 5.5 dBic (min) GLONASS L1 4.5 dBic (min) GLONASS L2 4.5 dBic (min) L-Band 3 dBic (min) 1.5 dB (typical) Nominal Impedance 50 Ohms Environmental Enclosure Temperature Water / Dust Rating Random Vibration Sinusoidal Vibration Shock Bump Drop Aluminum with plastic radome Operating: -50°C to 85°C Storage: -55°C to 85°C IP67 IEC 60068-2-34, Test Fd IEC 60068-2-6, Test Fc IEC 60068-2-29 Test Ea IEC 60068-2-29 Test Eb 2 m pole drop to concrete Power Input Voltage 3-18 VDC; Reverse polarity protected Power Consumption 55 mA (typical) Diameter with Ground Plane 200 mm Weight 430 g (without Ground Plane) 615 g (with Ground Plane) Centering < 1 mm, micro-centered