HiPer II Standard Configuration • HiPer II GNSS Receiver • BDC58 Li-ion battery x2 • CDC68 charger • Serial cable • 100mm spacer (for HiPer II with UHF radio) • 5/8 inch conversion plug • User manual (CD-ROM) • Carrying case Optional Accessories • Bipod • Bracket for FC-250 • 5.5m tape measure • Type 3WP Prism adapter • Type 2 Base Basic Specications Tracking capability Number of channels*1 GPS Tracked signals*1 GLONASS SBAS 72 Universal Channels L1 CA, L1/L2 P-code, L2C L1/L2 CA, L1/L2 P-code WAAS, EGNOS, MSAS Positioning accuracy*2 Static Fast static Kinematic RTK DGPS L1+L2 L1 only L1+L2 L1+L2 L1+L2 H: 3mm + 0.5ppm H: 3mm + 0.8ppm H: 3mm + 0.5ppm H: 10mm + 1ppm H: 10mm + 1ppm < 0.5m V: 5mm + 0.5ppm V: 4mm + 1ppm V: 5mm + 0.5ppm V: 15mm + 1ppm V: 15mm + 1ppm The Next Generation, Dual-Frequency GNSS Receiver User interface Operation Single-button operation for power, receiver reset, memory initialization 22 LED status indicators Multi-lingual voice messages for receiver status information Display panel Voice navigation Data management Memory Data format Update/output rate*3 Communication port SD/SDHC card (FAT16/32 formats) RTCM SC104 2.1/2.2/2.3/3.0/3.1, CMR, CMR+, NMEA, TPS 1Hz, 5Hz, 10Hz, 20Hz RS-232C (4,800 to 115,200bps) Wireless communication Bluetooth modem Radio*4 Cellular modem*4 V.1.1, Class 1, 115,200bps Internal, receiver (RX) and transmitter (TX), 410 to 470MHz Internal, GSM or CDMA Environmental Dust and water protection IP67 (IEC 60529:2001) at closing all connector caps. Protected against temporary immersion up to 1m(3.3ft.) depth. Shock 2m (6.56ft.) pole drop Operating temperature HiPer II receiver -40 to +65°C (-40 to +149°F) BDC58 battery -20 to +65°C (-4 to +149°F) Radio/cellular modem -20 to +55°C (-4 to +131°F) Storage temperature -45 to +70°C (-49 to +158°F) Humidity 100%, condensing Physical Enclosure Size Weight Magnesium alloy housing Dia. 184 x H 95mm (dia. 7.24 x H 3.74 in.) HiPer II receiver 1.1kg (2.43 lb.) BDC58 battery 195g (6.9 oz.) Internal modems 115 to 230g (4.1 to 8.2 oz.), depending on modem specifications Power supply Standard battery BDC58 Operating time at 20°C (68°F) Charger CDC68 Recharging time Input voltage External power Input voltage TOPCON CORPORATION 75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan Phone: (+81)3-3558-2993 Fax: (+81)3-3960-4214 www.topcon.co.jp Removable, Li-ion rechargeable battery, 7.2V, 4.3Ah > 7.5 hours in static mode w/Bluetooth connection Approx. 4 hours at 25°C (77°F) 100 to 240V AC (50/60Hz)*5 6.7 to 18V DC *1 Number of channels and tracked signals vary according to receiver configurations. *2 Accuracy depends on the number of satellites used, obstructions, satellite geometry (DOP), occupation time, multipath effects, atmospheric conditions, baseline length, survey procedures and data quality. *3 1Hz standard. Higher rates available as options. *4 Internal "radio" or "radio+cellular modem" available as factory options. *5 Use with an appropriate AC power cable. Your local Authorized Topcon dealer is: Specifications subject to change without notice ©2010 Topcon Corporation All rights reserved. Product names mentioned in this brochure are trademarks of their respective holders. Product colors in this brochure may vary slightly from those of actual products owing to limitations of the printing process. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. 2010 04-1 P-56-2 Completely Integrated, Advanced GNSS Solution • Smaller. Lighter. Faster. • Integrated GPS+GLONASS RTK & Static Receiver • Rugged, Lightweight Magnesium Alloy Construction • Cable-free Bluetooth Wireless Operation • Optional Integrated UHF or Digital UHF Radio • Optional Integrated GSM or CDMA Modem • Bright, Easy-to-read LED Panel • Voice Messages for Receiver Status • SD/SDHC Memory Card Slot • Removable Li-Ion Battery

Compact, Lightweight, Cable-free Solutions for All GNSS Positioning Applications In the early 2000s, Topcon revolutionized the GNSS positioning technology with the HiPer series of receivers. Its fully integrated design gave the highest agility to RTK rovers ahead of its time, by eliminating extra equipment such as backpacks and cables. Now Topcon raises the industry standard once again L1/L2 GNSS antenna 72-channel L1/L2 GNSS receiver Rugged Receiver and Powerful Field Controller / Software GPS+ Dual-Frequency Signal Tracking Durability that Withstands the Severest Condition Topcon’s industry-leading...