IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 17.10.2019 Errors and technical changes excepted

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 1 Notes and Warnings A Attention! This description is not a substitution for the concerned product's documentation. Please do read the documentation including the manuals carefully before dealing with this product. If the safety instructions in the documentation are not followed dangerous situation can occur that can result in damages, injuries and/or death by high voltage or wrong handling. In case you do not have the correct documentation you can order it by contacting [email protected]....

IndustriestraBe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] Housing Mounting Aluminium die cast, powder coated front-glass • Landscape or portrait • Standalone • In-dash

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] Type: TFT Color Graphic LCD with LED 4 Input Devices Indicators and Sensors • Light sensor • Multi-Color LED Touch Kapazitiver Touch (only OPUS B3 Eco Basic Touch) 5 Electronics Processor platform CPU: Freescale I.MX6®, 800 MHz Mass storage: 2 GByte (approx. 700 MB for customer use) RAM: 512 MByte Buffered for 2 weeks at Tambient Deviation: max. 1s/day Power supply System supplied through terminal 30 (battery +, see pinout) and 31 (battery -, see pinout). Terminal 15 (ignition) to be used to switch...

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 2 x CAN-Interfaces according to ISO 11898, CAN- Host 2.0 specification 2.0 B active, up to 1 Mbit/s (default 250 Side connector: 1 x Typ A High speed Kbit/s) Guaranteed 900mA @ 5V 7 Connectors Connectors Main: Tyco-AMP 1437288-6 Mating connector (customer) Tyco-AMP 3-1437290-7 Mating crimp contact (customer) Tyco-AMP 3-1447221-4 Dummy Plug (customer) Tyco AMP 4-1437284-3 OPUS displays in the industrial sector are only intended to use with cable length less than 30 meters. 8 Software Operating System...

Industriestraße 7 . 65366 Geisenheim . Germany www.topcon-electronics.de . [email protected] 9 Testing and Verification CE-Compliance EU Directive 2014/30/EU (EMC) according to • EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal electrical power supply • EN ISO 14982: Agricultural and forestry machinery - Electromagnetic compatibility Test methods and acceptance criteria • EN 50498: Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles • EN 61000-6-2: Electromagnetic compatibility (EMC) - Generic...

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] Test Pulse 1 12V-System: Us=-112V; FS: C Test Pulse 2a 12V-System: Us=+55V; FS: B Test Pulse 2b 12V-System: Us=+10V; FS: C Test Pulse 3a 12V-System: Us=-165V; FS: A Test Pulse 3b 12V-System: Us=+112V; FS: A EMC Emission conducted 12V-System (Maximum values): Positive slow pulses: +37V Negative slow pulses: -75V Positive fast pulses: +75V Negative fast pulses: -112V 24V-System (Maximum values): Positive slow pulses: +37V Negative slow pulses: -150V Positive fast pulses: +150V Negative fast pulses:...

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 9 Testing and Verification El - Type approval EU Directive ECE R 10.4 Protection Level (IP Code) IP 66 according to ISO 20653: Road Vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access Electrical 12 and 24V-Systems according to: Inverse Polarity resistance 5min @ -48V (no defect) Over voltage resistance 5min @ +48V (no defect) Start behavior Start over Temperature Start at TRoom; decrease in 5°steps to TMin; go to TRoom; increase...

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 9 Testing and Verification Mechanical Vibration, noise r Frequency PSD [HZ] [(m/s2)2/HZ] Vibration, sinusoidal Resonance sweep: Endurance Test: 1 Octave/minte, 30min per resonance 0.5 Octave/minte, 8h per resonance, FS: A Mechanical shock Part 1: 300m/s2, 18ms, 10 times per axis/direction; FS: A Part 2: 500m/s2, 11ms, 3 times per axis/direction; FS: A Part 3: 500m/s2, 6ms, 10 times per axis/direction; FS: A Part 4: 400m/s2, 6ms, 4000 times per axis/direction; FS: A Drop Test Drop the DUT on each...

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 9 Testing and Verification Climate Salt spray resistance Part 1: 7 cycles at 24h (8h spraying; 16h rest) salt concentration: 5% Part 2: 4 cycles at 168H; 1 cycle: Chemical resistance Apply once a day, for three days, the following chemicals with a brush over the exposed sur-face. Inspect without rinsing immediately after-wards and after 100h. Alcohol, Antifreeze liquid (Ethyl-glycol), Diesel oil, Domestic Ammonia, Gasoline, Hydraulic oil 10W40, Liquid lime, Motor oil, NPK Chemical fertilizers 20...

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] Main connector pinout View on rear side of the B3