Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Technical Data Sheet OPUS B2 Basic 03.05.2024 Errors and technical changes excep

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] 1 Notes and Warnings Attention! Please note: This description is not a substitution for the concerned product’s documentation. Please do read the documentation including the manuals carefully before dealing with this product. If the safety instructions in the documentation are not followed dangerous situation can occur that can result in damages, injuries and/or death by high voltage or wrong handling. In case you do not have the correct documentation, you can order it by contacting [email protected]....

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Glas, PC/ABS ● landscape or portrait ● standalone ● in-dash

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Dimensions OPUS B2 Standard Glas, PC/ABS Autotex XEF200 ● landscape or portrait ● standalone ● in-dash

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] TFT Color Graphic LCD with LED backlight Brightness: Contrast Ratio: 4 Input Devices Touch 4 keys with fluorescent print w/o Backlight (only B2 Standard Basic) 5 Electronics Processor platform CPU: Freescale NXP i.MX 6 ULL 32-bit MPU, ARM Cortex-A7 core, 528MHz 2 GB (4GB eMMC in pSLC-Mode) 256 MB, DDR3L, 1600Mbps run time counter, without buffer Power supply System supplied through terminal 30 (battery +, see pinout) and 31 (battery -, see pinout). Terminal 15 (ignition) to be used to switch on/off....

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] 6 Interfaces CAN Bus 2 x ISO 11898, CAN-specification 2.0 B active, up to 1 Mbit/s All interfaces are CAN-FD tolerant USB Back connector: USB 2.0, Type C, high speed, 1A, short protected against Vbus, thermal protected, ault flag 7 Connectors Connectors Main 8 Software Operating System Application Programming Linux • Topcon Projektor Tool • CODESYS • C/C++ 9 Testing and Verification CE-Compliance EU Directive 2014/30/EU (EMC) according to ● EN 13309: Construction machinery – Electromagnetic compatibility...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] QP: Quasi-Peak AV: Average P: Peak 1: Value decreases linearly with the logarithm of the frequency. 2: Value increases linearly with the logarithm of the frequency. EMC Immunity radiated 20MHz to 800MHz with amplitude modulation 800MHz to 6GHz with pulse modulation 30V/m for the radiated field (absorber lined chamber) testing method (ISO 11452-2) in vertical and horizontal polarization OR/AND 60mA for the Bulk Current Injection (BCI) testing method (ISO 11452-4) Test Pulse 1 Test Pulse 2a Test...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] (Starting profile) Load Dump Electrostatic Discharge +/- 4kV contact discharge; FS: A +/- 8kV contact discharge; FS: C +/- 4kV air discharge; FS: A +/- 8kV air discharge; FS: B +/- 15kV air discharge; FS: C E1 – Type approval EU Directive ECE R 10 Protection Level (IP Code) IP66 and IP67 according to ISO 20653: Road Vehicles – Degrees of protection (IP-Code) – Protection of electrical equipment against foreign objects, water and access Electrical 12 and 24V-Systems according to: Inverse Polarity...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Drop in Supply Voltage 12 V System Battery less Operation 12 V System Mechanical Vibration, noise Frequency [Hz] Vibration, sinusoidal Resonance sweep Endurance Test: 0,1 Octave/minute, 30min per resonance Mechanical shock Part 1: 300m/s², 18ms, 3 times per axis/direction; FS: A Part 2: 500m/s², 6ms, 10 times per axis/direction; FS: A

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Part 3: 400m/s², 6ms, 4000 times per axis/direction; FS: A Drop Test Drop the DUT on each side and each edge from a high of 1m on a concrete floor. No damage or visible damage. Package Drop Test Drop the DUT inside the package on each side and each edge from a high of 1m on a concrete floor. No damage of the DUT No cracks to the package Climate Salt spray resistance Part 1: 7 cycles at 24h (8h spraying; 16h rest) salt concentration: 5% Part 2: 4 cycles at 168h; 4 cycle: Chemical resistance Apply...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] 10 Pinout Main connector pinout Description Service Enable ignition input; terminal 15 supply voltage -; terminal 31 supply voltage +; terminal 30 CAN 2 low CAN 2 high CAN 1 low CAN 1 h