*mydirectindustry

OPUS 46

Product catalog summary

Notes and Warnings:
This document is not a substitute for the product's full documentation. Users must read all manuals and safety instructions to avoid dangerous situations that could result in damage, injury, or death. Only trained personnel should handle the device, and it should not be opened to avoid high voltage risks. If the device is damaged, it must be taken out of service.

Mounting and Handling:
1. Do not use the cable as a handle.
2. Mount in a clean environment to avoid dust and oil damage.
3. Avoid using force during mounting.
4. Only trained personnel should mount the device.
5. Do not open or disassemble the device.
6. Clean with a moist, lint-free cloth; avoid abrasive cleaners.
7. Store in a cool, dry place away from sunlight.
8. Display reaction time increases below 10°C.

Specifications:
Display: 5.7” TFT Color Graphic LCD, 240 x 320 px resolution, 16 colors, 300 cd/m² brightness, 350:1 contrast ratio.
Input Devices: 5 softkeys and 6 hardkeys with tactile feedback and LED backlight, 1,000,000 actuations lifetime.
Electronics: Infineon C167CR-LM CPU, 4 MByte mass storage, 512 KByte SRAM, buffered RTC, 80 dB(A) buzzer.
Power Supply: 11-50 V DC operating voltage, short circuit, over-voltage, and inverse polarity protection.
Indicators and Sensors: 6 LED indicators, 3 hardware and 3 software controlled, encoder with 30 mechanical detents and push function, 500,000 full rotations lifetime.

Connectors and Interfaces:
Main Connector: Deutsch, 12 pin, DT15-12P.
CAN Bus: 1 x CAN-Interface, ISO 11898, up to 1 Mbit/s.
RS232: 1 x RS232-Interface, max. 115 Kbps.

Software:
Operating System: Wachendorff BIOS.
Application Programming: Wachendorff Projektor Tool.

Testing and Verification:
CE-Compliance: EU Directive 2004/108/EC (EMC), EN ISO 14982.
E1 - Type Approval: EU Directive 72/245/EWG.
Protection Level: IP 6k5 according to DIN 40050: Part 9.
Electrical Requirements: 12 and 24 V systems, ISO 7637-2 (Level III).
Mechanical Requirements: Vibration 5g, Shock 30g.
Climate Requirements: Operating temperature -25 to +65°C, Storage temperature -30 to +85°C.

Pinout:
Detailed pin assignments for the main connector, including inputs for LED indicators, RS232, CAN, and power supply connections.

Catalog excerpts

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 21.06.2017 Errors and technical changes excepted

Open the catalog to page 1

Industriestraße 7 . 65366 Geisenheim . Germany www.topcon-electronics.de . [email protected] Attention! This description is not a substitution for the concerned product’s documentation. Please do read the documentation including the manuals carefully before dealing with this product. If the safety instructions in the documentation are not followed dangerous situation can occur that can result in damages, injuries and/or death by high voltage or wrong handling. In case you do not have the correct documentation you can order it by contacting [email protected]. Only properly trained personnel...

Open the catalog to page 2

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] Housing Plastic housing, colored light grey (NCS 3502 G). Mounting • Standalone

Open the catalog to page 3

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] Type: TFT Color Graphic LCD Colors: 16 6 LED indicators 3 hardware controlled 3 software controlled 4 Input Devices Softkeys • 5 keys with tactile feedback • Green LED backlight • Lifetime 1.000.000 actuations Hardkeys • 6 keys with tactile feedback • Green LED backlight • Lifetime 1.000.000 actuations Encoder • Encoder with 30 mecha nical detents and push function • Lifetime 500.000 full rotations Mass storage: 4 MByte SRAM: 512 KByte Power supply Operating voltage range: 11 ......

Open the catalog to page 4

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] CAN Bus 1 x CAN-Interface according to ISO 11898, CAN-specification 2.0 B active, up to 1 Mbit/s (default 250 Kbit/s, 500 Kbit/s, 750 Kbit/s and 1 Mbit/s) Inputs 3 digital inputs for 3 LED indicators Over-voltage protection: Up to 48 V DC Minimum Hi level: > 10 V Maximum Lo level: < 3 V 8 Software Operating System Wachendorff BIOS Application Programming • Wachendorff Projektor Tool 9 Testing and Verification CE-Compliance EU Directive 2004/108/EC (EMC) according to • ENISO 14982: Agricultural...

Open the catalog to page 5

IndustriestraGe 7 ■ 65366 Geisenheim ■ Germany www.topcon-electronics.de ■ [email protected] 10 Pinout Main connector pinout n. c. Indicator B input Ignition Input Indicator C input CarGND Input for LED indicator A RS232 receive data CAN high CAN low RS232 transmit data Not connected Input for LED indicator B Ignition input; terminal 15 Supply voltage +; terminal 30 Supply voltage -; terminal 31 Input for LED indicator C Car GND View on rear side of the OPUS 46

Open the catalog to page 6

All Topcon Electronics GmbH & Co. KG catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list