Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Technical Data Sheet C – Series 06.12.2024 Errors and technical changes exc

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] 1 Notes and Warnings Attention! Please note: This description is not a substitution for the concerned product’s documentation. Please do read the documentation including the manuals carefully before dealing with this product. If the safety instructions in the documentation are not followed dangerous situation can occur that can result in damages, injuries and/or death by high voltage or wrong handling. In case you do not have the correct documentation, you can order it by contacting [email protected]....

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Aluminium die cast Powder coated ● Landscape or portrait ● Standalone

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Aluminium die cast Powder coated ● Landscape or portrait ● Standalone

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Aluminium die cast Powder coated ● Landscape or portrait ● Standalone

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] TFT Color Graphic LCD with LED backlight Contrast Ratio: 4 Input Devices Touch Capacitive Touch Light sensor Proximity sensor Acceleration Sensor Microphone 1 Multicolor LED 5 Electronics Current consumption (without external load), max Low-power mode current depends on configuration Processor platform CPU: Coprocessor: Mass storage: RAM: RTC: i.MX 8QuadPlus STM32H725AGI3 10.6 GByte pSLC (minus space for OS & application) 4 GByte LPDDR4 Buffered by gold cap Buffered for 2 weeks at Tambient Deviation...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Power supply System supplied through terminal 30 (battery +, see pinout) and 31 (battery -, see pinout). Terminal 15 (ignition) to be used to switch on/off. Operating voltage range: 9 … 36 V DC. Short circuit protection. Over-voltage protection up to 48 V for max. 5 min. Inverse polarity protection up to -48 V DC for max. 5 min. 6 Interfaces CAN Bus 3 x CAN-Interface according to ISO 11898, CAN-specification 2.0 B active, up to 1 Mbit/s (default 250 Kbit/s, possible 10Kbit/s, 20Kbit/s, 50Kbit/s,...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] 7 Connectors Connectors Main Typo-AMP 1437288-6 Mating connector (customer) Typo-AMP 3-1437290-7 Mating crimp contact (customer) Typo-AMP 3-1447221-4 Mating crimp contact for power supply pins KL30 (Pin 1) and KL31 (Pin 3) (customer) Typo-AMP 3-1447221-3 Dummy Plug (customer) Typo-AMP 4-1437284-3 8 Software Operating System Application Programming Linux Kernel 6.1.1 or higher (NXP Release) • tbd

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] 9 Testing and Verification CE-Compliance EU Directive 2014/30/EU (EMC) according to ● EN ISO 14982: Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria QP: Quasi-Peak AV: Average P: Peak 1: Value decreases linearly with the logarithm of the frequency. 2: Value increases linearly with the logarithm of the frequency. EMC Immunity radiated 20MHz to 800MHz with amplitude modulation 800MHz to 6GHz with pulse modulation. 30V/m for the radiated field...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Test Pulse 1 Test Pulse 2a Test Pulse 2b Test Pulse 3a Test Pulse 3b Test Pulse 4 (Starting profile) Load Dump Positive slow pulses: +25V Positive slow pulses: +25V Negative slow pulses: -50V Negative slow pulses: -100V Positive fast pulses: +50V Positive fast pulses: +100V Negative fast pulses: -75V Negative fast pulses: -100V Electrostatic Discharge +/- 8kV contact discharge; FS: A +/- 15kV air discharge; FS: A E1 – Type approval EU Directive ECE R 10.6 Protection Level (IP Code) IP 6k6 according...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Drop in Supply Voltage 12 V System Battery less Operation 12 V System Mechanical Vibration, noise Frequency [Hz] 32h per Axis; FS: A Vibration, sinusoidal Resonance sweep Endurance Test: Mechanical shock Part 1: 300m/s², 18ms, 3 times per axis/direction; FS: A Part 2: 500m/s², 6ms, 10 times per axis/direction; FS: A

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Part 3: 400m/s², 6ms, 4000 times per axis/direction; FS: A Drop Test Drop the DUT on each side and each edge from a high of 1m on a concrete floor. No damage or visible damage. Package Drop Test Drop the DUT inside the package on each side and each edge from a high of 1m on a concrete floor. No damage of the DUT No cracks to the package Climate Salt spray resistance Part 1: 7 cycles at 24h (8h spraying; 16h rest) salt concentration: 5% Chemical resistance Apply once a day, for three days, the following...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] No material damage, No visible change 10 Pinout Main connector pinout Description supply voltage +; terminal 30 ignition input; terminal 15 supply voltage -; terminal 31 Wake Input, “Doorswitch” Frequency Output Digital Input 4 / Frequency Input 4 Digital Highside Output CAN 1 high CAN 1 low CAN 2 high CAN 2 low CAN 3 high CAN 3 low RS232-2 – Receive Data input RS232-2 – Transmit Data output RS232-1 – Receive Data input RS232-1 – Transmit Data output RS232 GND Digital Input 1 / Frequency Input...

Industriestrasse 7 ▪ 65366 Geisenheim ▪ Germany www.topcon-electronics.de ▪ [email protected] Automotive Ethernet connector pinout D+ 12V Power supply DPower GND View on rear side of the OPUS-C console