3kV flexible EMC LSZH screened cable for Variable Frequency Drive cables (VFD cables). 1. Conductor Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228. 2. Grounding Conductor The grounding conductor is divided into three conductors; the equivalent cross section is approximately 50% of the section of the phase conductor. Cross-linked polyethylene (XLPE) The standard identification of insulated conductors is the following: 4G grey + brown + black + Green/yellow (up to 4 mm2) 3x + 3G grey + brown + black + Green/yellow (3 x) (from 6 mm2 onwards) 4. Screen Aluminium-polyester tape screen, helically placed over the insulated conductors. Over the tape there is a tinned copper braid screen. The tape and the braid act as a double screen to cut out all of the the electromagnetic interference. The screen has a cover of 100% and its total section is approximately 10% of one of the conductors. 5. Outer sheath Polyolefin LSZH outer sheath, black colour. APPLICATIONS ROZ1-K EMC VFD 1,8/3kV cable has been specially designed for Variable Frequency Drive Motors and installations where it is necessary to limit the effects of electromagnetic interference (EMI). This cable render is an example from this product does not neccesarily match the selected core size or number of cores.

CHARACTERISTICS 0 Electrical performance O Approvals CE DNV-GL ABS (in progress) RoHS Thermal performance Maximum service temperature: 90°C. Maximum short-circuit temperature: 250°C (max. 5 s). Minimum service temperature: -40°C (fixed and protected installations). OFire performance Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1. Fire non-propagation based on UNE-EN 60332-3 and IEC 60332-3. LSZH (Low Smoke Zero Halogen) based on UNE-EN 60754-1 and IEC 60754-1. Low smoke emission based on UNE-EN 61034 and IEC 61034.: Light transmittance > 60% Low corrosive gases emission based on...