Top Cable TOXFREE ZH ROZ1-K (AS) VFD EMC 0,6/1 kV Flexible EMC LSZH screened cable for Variable Frequency Drive cables (VFD cables). IEC 60502-1 / IEC 60092-353 DESIGN Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228. Grounding Conductor The grounding conductor is divided into three conductors; the equivalent cross section is approximately 50% of the section of the phase conductor. Insulation Cross-linked polyethylene (XLPE) The standard identification of insulated conductors is the following: 4G grey + brown + black + Green/yellow (up to 4 mm2) 3x + 3G grey + brown + black + Green/yellow (3 x) (from 6 mm2 onwards) Screen "Aluminium-polyester tape screen, helically placed over the insulated conductors. Over the tape there is a tinned copper braid screen. The tape and the braid act as a double screen to cut out all of the the electromagnetic interference. The screen has a cover of 100% and its total section is approximately 10% of one of the conductors. Outer sheath Polyolefin LSZH outer sheath, black colour. The ripcord allows you to gently tear the outer-sheath allowing you to gently peel it away without damaging the screen.

CHARACTERISTICS O Electrical performance O Approval CE DNV-GL ABS (in progress) RoHS Mechanical performance Minimum bending radius: x10 cable diameter. Impact resistance: AG2 Medium severity. Chemical performance Chemical & Oil resistance: Good. Water performance Water resistance: AD5 Jets. Other Meter by meter marking. Ripcord. Electric fields resistant. Thermal performance Maximum service temperature: 90°C. Maximum short-circuit temperature: 250°C (max. 5 s). Minimum service temperature: -40°C (fixed and protected installations). Fire performance Flame non-propagation based on UNE-EN 60332-1...