Catalog excerpts

TT-108-K_EN - 1

Water up to 90°C Heating capacity 18 kW | 27 kW | 36 kW | 45 kW Water temperature control unit Cooling capacity 260 kW @ 90°C Cooling system direct Applications: moulds, plates Direct cooled device with high flow rate and return volume ▪ Self-optimizing temperature controller with temperature display 1/10°C – steps ▪ Display in °C to or °F and l/min or gal/min ▪ Digital flow display and monitoring ▪ Automatic temperature control ▪ Switchover for temperature control on the mould ▪ Heating switchable in stages ▪ Heaters with cascade connection (only 27 kW / 36 kW / 45 kW) ▪ Pressure display ▪ Automatic or manual refill ▪ Automatic mould drainage ▪ Leakstopper device – operation in pressure and vacuum mode possible ▪ Submersible sealless pump made from bronze ▪ Powerful direct cooling ▪ Corrosion resistant device for a long service life ▪ All parts in contact with water are made of stainless steel or bronze ▪ Unit on castors Safety features ▪ Level control for dry run protection ▪ Electronic temperature limitation and monitoring in the controller ▪ Mechanical safety thermostats ▪ Visual and acoustic fault indications ▪ Integrated circuit breakers

Open the catalog to page 1
TT-108-K_EN - 2

Cooling capacity Pump capacity = In practice achievable values permanent internal bypass considered = Cooling capacity at 12°C cooling water temperature Technical data Product attribute Temperature range Temperature control Self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control Electronically, with digital display and automatic control of the minimum flow. Heating capacity Switchable in stages Automatic switching of the required heating power Cooling capacity Pump capacity Motor Pressure...

Open the catalog to page 2

All TOOL-TEMP FRANCE catalogs and technical brochures

  1. TT-108-E_EN

    2 Pages

  2. TT-170_EN

    2 Pages

  3. TT-1500-W_EN

    2 Pages

  4. TT-1548-E_EN

    2 Pages