Cooling system indirect Applications: moulds up to 50 kg, rollers up to 80 mm 0, length 300 mm Functions ■ Self-optimizing temperature controller with temperature display 1/10°C - steps ■ Display in °C or °F and l/min or gal/min ■ Automatic temperature control ■ Automatic water filling ■ Submersible sealless pump made from bronze ■ Limescale free heat exchanger ■ Corrosion resistant device for a long service life ■ All parts in contact with water are made of stainless steel or bronze ■ Level control for dry run protection ■ Electronic temperature limitation and monitoring in the controller ■ Mechanical safety thermostat ■ Visual and acoustic fault indications ■ Integrated circuit breakers ■ Main switch, transformer and motor protection switch

Cooling Capacity Pump Capacity = Cooling capacity at 12°C cooling water temperature = In practice achievable values permanent bypass considered Technical data Product attribute Temperature range Temperature control TT-170 Up to 90°C with water Self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Heating capacity Cooling capacity Pump capacity Motor Pressure mode Max. 2,2 bar / max. 15,2 l/min. at 50 Hz - see diagram Max. 2,9 bar / max. 19,1 l/min. at 60 Hz - see diagram Filling amount Connections Medium...