*mydirectindustry

Catalogs
Tongdy Control Technology
Wall mount CO2 transmitter

Wall mount CO2 transmitter

1 / 3 PagesView full catalog

Wall mount CO2 transmitter

Product catalog summary

Features

Real-time CO2 level detection using NDIR infrared technology with selectable detection ranges.
Self-Calibration Algorithm ensures a 15-year sensor lifetime.
Wall-mountable design suitable for HVAC and ventilation systems.
Analog output options: 0~10VDC or 4~20mA, selectable via jumpers.
Special 'L' series with 6 LED lights for clear CO2 level indication.
Optional on/off relay output for fan control.
Modbus RS485 communication interface with antistatic protection.
CE-Approved.

Specifications

Gas Detected: Carbon Dioxide (CO2).
Sensing Element: Non-Dispersive Infrared Detector (NDIR).
Accuracy: ±40ppm + 3% of reading or ±75ppm at 25℃ (77℉), 2000ppm.
Response Time: Less than 2 minutes for 90% step change.
Power Supply: 24VAC/24VDC with a maximum consumption of 1.5W.
Operating Conditions: 0~50℃ (32~122℉); 0~95%RH, non-condensing.

Models Guide

F2000TSM-CO2-S100 series: Analog output with various CO2 ranges.
F2000TSM-CO2-S101 series: Analog output with Modbus RS485 communication.
F2000TSM-CO2-L series: Includes 6 indicator lights and various output options.

Wiring and Mounting

Wiring diagrams provided for different series models.
Mounting dimensions: 100mm x 80mm x 28mm.

Accessories

Power adaptors available for European and American plugs.

Catalog excerpts

CARBON DIOXIDE DETECTOR Model: F2000TSM-CO2 Series CE Approval Real-time detecting CO2 level. NDIR infrared CO2 module inside with four CO2 with a touch button to operate a fan control. detection range selectable. CO2 sensor has Self-Calibration Algorithm and 15 Design for HVAC, ventilation systems, offices, or other public places. years lifetime Provide a special model with a on/off relay output Modbus RS485 communication interface optional: 15KV antistatic protection, independent address Providing one analog output with voltage or current 0~10VDC/4~20mA selectable easily via jumpers For duct probe CO2 transmitter, and CO2+ Special “L” series with 6 lights indicates CO2 level and Temp.+ RH 3 in 1 transmitter, please see our other makes CO2 level show clearly. Sensing element Non-Dispersive Infrared Detector (NDIR) ± 40ppm + 3% of reading or ± 75ppm (whichever is greater) <2% of FS over life of sensor (15 yr typical) Calibration interval ABC Logic Self Calibration System Response time <2 minutes for 90% step change 2 hours (first time) 2 minutes (operation) 02,000ppm / 05,000ppm selectable in orders 020,000ppm / 050,000ppm just for TSM-CO2-S series Sensor life Power supply Analog outputs Relay output 1X2A switch load Four set points selectable by jumpers

Open the catalog to page 1

From left to right: Modbus RS485 interface Modbus interface 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection. Operation conditions Storage conditions Installation standard Models Guide Type 1X0~10V output and 1xon/off output CO2 range: 0~2000ppm 1Xanalog output, Modbus RS485 communication 1Xanalog output, Modbus RS485 communication. 1Xanalog output, Modbus RS485 communication. 1Xanalog output, Modbus RS485 communication. (1xanalog output, Modbus RS485 interface) CO2 Detector with 6 indicator lights 6 lights indicate CO2 measurements range, Modbus...

Open the catalog to page 2

Plug-in power adapter, Input: 100~240VAC ; Power adaptor-E Output: DC 24V/ 240mA. European plug Accessories Plug-in power adapter, Input: 100~240VAC; Output: DC 24V 240mA. American plug Wiring Diagram

Open the catalog to page 3

All Tongdy Control Technology catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list