Carbon Monoxide Monitor / Controller Model#: G02-CO-B SERIES Indoor Carbon Monitor + Temperature + Humidity Detection Three-color backlit LCD 1xOn/Off output optional, Modbus RS485 Optional Temperature detection and display Relative humidity detection optional Buzzer alarm for a preset CO level Provide 1 x on/off output to control a ventilator High quality technics, elegant appearance, CE-approval Three-color backlit LCD indicates three CO ranges Real time carbon monoxide detection and alarm Wall mounting type and desktop type Real time monitoring carbon monoxide level with Provide four setpoints of CO to control the relay action Semiconductor sensor with up to 5 years long lifetime Three-color (green/yellow/red) LCD backlit indicates 15 KV antistatic protection, independent address three carbon monoxide ranges Modbus RS485 communication interface optional, Temperature detection and display Humidity detection and display optional Wall mounting type Preset the buzzer alarm level for measured carbon monoxide Provide 1xOn/Off relay output to control a ventilator Application Carbon monoxide is a deleterious gas with colorless and odorless character , which could be absorbed by lung quickly, the speed rate of combination of CO and hemoglobin more than 250 times with oxygen, then stops oxygen circulation around the body; which have big character of heavy toxicity, so carbon monoxide poisoning have became a big problem around the world. G02-CO is used to monitor room carbon monoxide level as well as temperature and optional humidity. With one dry-contact of relay output, it can control a ventilator according the setpoint of carbon monoxide. With the Modbus RS-485 communication interface, it can be connected with a DDC/PLC or a PC.

Industrial environment Underground parking lot, maintenance garage Indoor air quality detection Freezing machine room and other places Carbon monoxide Sensing element Semiconductor gas-sensitive component Temperature sensor (option) Humidity sensor (option) HS series capacitive sensor Power supply Signal update 36 hours (first time), 10 minutes (normal operation) Display resolution Temperature measurement range Humidity measurement range Relay output(option) Buzzer alarm 1xRelay output to control a ventilator or air-purifier, Max. current 3A resistance Alarm starts when CO measurement reach up...

CO & temperature detector Three-color backlit LCD, buzzer alarm for and monitor preset CO level. Modbus RS485 interface Three-color backlit LCD, buzzer alarm for CO& temperature monitor 230VAC preset CO level Three-color backlit LCD, buzzer alarm for 24VAC/VDC with a preset CO level 230V power adaptor CO & temperature monitor and controller Three-color backlit LCD, buzzer alarm for 230VAC preset CO level. 1X dry contact output CO & temperature detector Three-color backlit LCD, buzzer alarm; and controller 1 on/off output; Modbus RS485 interface Outlet VOC's Accessory for wall mounting 84.00 Relative...