CARBON DIOXIDE CONTROLLER Model: F2000TSM-CO2-PID CE Approval Optional Modbus RS485 interface NDIR infrared CO2 module with self-calibration Four CO2 setpoints selectable via jumpers for PID and more than 10 years lifetime Optional 6 LED lights indicating CO2 ranges Application for ventilation systems, BAS and single PID output for a VAV terminal with the setpoint of Smart structure and easy mounting Linear output available for CO2 measurements Sensing element Non-Dispersive Infrared Detector (NDIR) <2% of FS over life of sensor (15 yr typical) Calibration interval ABC Logic Self Calibration System Response time <2 minutes for 90% step change 2 hours (first time) 2 minutes (operation) 02,000ppm (default) 05,000ppm available More than 10 years Power supply Analog output Output select PID control output or Linear output for CO2 measurement selectable via jumpers Minimum opening 2V default and can be preset via RS485 Provide 4 CO2 setpoints for PID control: Modbus interface Modbus RS485 interface, 19200bps, 15KV antistatic protection.

From left to right: Operation conditions Storage conditions Installation standard Models Guide Type Description 1Xanalog output with PID (linear output selectable), CO2 range: 0~2,000ppm/0~5,000ppm 1Xanalog output with PID (linear output selectable), Modbus interface. 6 LED lights indicates CO2 ranges. 1Xanalog output with PID (linear output selectable), CO2 range: 0~2,000ppm/0~5,000ppm 6 LED lights indicates CO2 ranges. 1Xanalog output with PID (linear output selectable), Modbus interface. CO2 range: 0~2,000ppm/0~5,000ppm Wiring Diagram