F2000IAQ-O3 Ozone Gas Monitor/ Controller Real time detecting environment ozone gas Temperature & Humidity detection The compensation of ozone measurements for air temperature and RH% Wall mount with LCD display Easy zero calibration way Optional one on/off dry contact output to control an ozone generator or a fan Optional an analog output for ozone measurement Real time detect ambiance ozone gas level Detect temperature and humidity at the same time Wall mounted with LCD display Provide an easy zero calibration way LCD can display ozone, temperature and humidity, Modbus RS-485 interface with 15KV antistatic environment temp.&RH% protection, independent base address setting also controlled device status etc. Optional 1X relay dry-contact output for an ozone generator or a fan optional Temperature range: 5~50℃ and relative humidity Special design compensation of ozone measurements for Optional 1Xanalog linear output (0~10VCD) for the ozone measurement Semiconductor sensor inside, high sensitivity to ozone gas humidity temperature relay on ozone level setting switch turn on/off down Sensing element Life time of ozone sensor More than 5 years Temperature sensor Tongdy Control Technology Co., Ltd add: Building #8, Courtyard #9 Dijin Rd. of Zhongguancun Environmental Protection Science and Technology Park, No.156 Beiqing Rd. Beijing 100095 tel: +86 10 59738930/31/32 http: www.tongdy.com email: [email protected]

Humidity sensor HS series capacitive sensor Power supply Display resolution Temperature measurement range Humidity measurement range 96 hours(first time) 1 hour(operation) Analog output (option) Output resolution One dry contact output to control an ozone device or a ventilation device Rated switching current 2A resistance load Modbus protocol with 19200bps. 15KV antistatic protection, independent base address Operation conditions/ Storage conditions Installment standard Wiring standard Wire section area <1.5mm Relay output (option) Models Model Ozone monitor & controller with 1Xon/Off relay...