CO2 Controller for Greenhouse or Similar Application Model: F2000IAQ-CO2-3003D CO2 + Temperature + Humidity Controller with the local Programmable Control Especially designed for agriculture equipments such as greenhouses, food and vegetable storages. Temperature setting range: 5~45℃ Humidity setting range: 595%RH Provid three relays outputs to control a CO2 generator, programmable control. temperature device and a humidity Wall mounting, LCD display Carbon dioxide sensor, temperature sensor and the working mode of the CO2 generator humidity sensor are internal. The three values can changeover automatically in day and night. Non-Dispersive Infrared Detector (NDIR) CO2 sensor, more than 10 years lifetime Special photosensitive sensor detection can make Provide brightness adjustment range to make day/night limit setting by end users. RS-485 communication interface with 15KV antistatic protection makes the controller being connected with PC (option) Special ABC Logic with patented Self Calibration Algorithm makes the CO2 sensor used up to more Multiple functions, high performance, low price, make it praiseworthily. Application F2000IAQ-CO2 -3003D multiple controller is used to control CO2 level, temperature and humidity in order to offer right environment for plants growth or for foods storage. It provides three dry contact outputs to control a carbon dioxide generator and a ventilator or other temperature/humidity equipments. It can provide RS485 communication with independent address to PC or other control systems. It will be used below application: 1. Greenhouses, which include vegetable planting houses and flowers planting houses. 2. Modern hydroponics gardens 3. Other relevant field of agriculture 4. Keep food and vegetable on fresh

Room Humidit Lock temperature y mode On/off Switch Decreas Increase e Sensing element Non-Dispersive Infrared Detector (NDIR) with more than 10 years lifetime Temperature sensor Humidity sensor HS series capacitive sensor Temperature dependence Temperature correction Self compensation Power supply ± 40ppm + 3% of reading (0~5,000ppm) ± 75ppm or 10% reading whichever is greater (0~20,000ppm) <2% of FS over life of sensor (15 yr typical) Calibration interval ABC Logic Self Calibration Algorithm Pressure dependence Altitude calibration Programmable from 0-9,900m in 100m increments Response Time...

Humidity setting range Output resolution 10Bit Three ways dry contact outputs with programmable selection to control CO2temperaturehumidity Rated switching current: 2A(220VAC/30VDC), resistance load RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection, 3 independent base address, max network node 64. Relay output Communication interface Flow rates Operation conditions Storage conditions Installment standard Wiring standard Approval Standard Models Model Description CO2& temperature& humidity detection to control CO2 generator and ventilation,...