TKG-CO2-1010D-PP Plug and Play Carbon Dioxide Controller for Greenhouse CE Approval Features Design for control the CO2 concentration in greenhouses or mushrooms NDIR infrared CO2 sensor inside with Self-Calibration and up to more than 10 years lifetime. Plug & play type, very easy to connect the power and a fan or CO2 generator. 100VAC~240VAC range power supply with European or American power plug and power connector. A max. 8A relay dry contact output Inside a photosensitive sensor for auto changeover day/night work mode Replaceable filter in the probe and extendable probe length. Design the convenient and easier buttons for operation. Optional split external sensor with 2 meter cables CE-Approval. Connect the controlled device Connect the 100V~240V power supply European/American power plug& connector optional

One application of the split controller and sensor Non-Dispersive Infrared Detector (NDIR) Measurement Range <2% of full scale over the life of the sensor Self-calibration system Response Time <5 minutes for 90% step change at low duct speed Pressure Dependence 2 hours (first time) 2 minutes (operation) 2 meter cable connection between the senor and the controller Power supply Dry contact output (optional) 1xdry contact output Max. switch current: 8A (load resistance) SPDT relay Plug& play type 100VAC~240VAC power supply with European or American power plug and power connector to the CO2 generator...

Typical Application: TKG-CO2-1010D-PP Controller is used to control CO2 level in greenhouse and other similar applications, providing a max 8A relay on/off output to control a CO2 generator or a fan. For ventilation system in greenhouse. The CO2 generator(default) or ventilator working mode can be preset by the end users Demensions & Mounting Wall mounting with plug&play probe Length Probe Diameter Installation Holes Power cable Cable to device Power plug/socket 1100.00mm 700.00mm European American Power input side 100-240VAC/5A Diameter: 3 * 1.5 mm 2 And wire length: 1100 mm Control equipment...