TONGBAO TB-WN1111 Wet blast cabinet

Product catalog summary

Introduction

The document provides a comprehensive overview of a wet sandblasting cabinet, detailing its specifications, operational procedures, safety standards, and maintenance recommendations.

Specifications

The wet sandblasting cabinet is designed for surface preparation and cleaning. Key specifications include dimensions, material construction, pressure ratings, and nozzle types. The cabinet is constructed from corrosion-resistant materials to ensure durability and longevity.

Operational Procedures

Instructions for operating the sandblasting cabinet include setup, media loading, and pressure adjustments. Operators are advised to follow a step-by-step process to ensure efficient and safe operation. Proper personal protective equipment (PPE) is mandatory during operation.

Safety Standards

The document outlines safety standards that must be adhered to, including guidelines for PPE, emergency shutdown procedures, and regular safety checks. Compliance with these standards is crucial to prevent accidents and ensure operator safety.

Maintenance Recommendations

Regular maintenance is essential for optimal performance. The document recommends routine checks of hoses, nozzles, and seals, as well as periodic replacement of worn components. Proper cleaning and storage procedures are also highlighted to extend the equipment's lifespan.

Conclusion

The wet sandblasting cabinet is a vital tool for industrial cleaning and surface preparation. Adhering to the outlined specifications, procedures, and safety standards will ensure effective and safe operation.

Catalog excerpts

Tb WN1111 Specification: 1 .Productnumber: Tb-WNIIII 2.Size (L/W/H): 1100*1820*1700mm 3. Working warehouse size: 1100*1100 *7 OOmm 6. Opening mode: Side door 8. Blasting nozzle diameter: q>8mm 10.Machine lights: 220V, 2*12W, LED 11 .Compressed air source pressure: 5—8bar(kg/cm2) 12. Compressed air source gas volume: 0.8—1.5m3/min 13. Abrasive types: Corundum abrasives are recommended, and other abrasives are also permitted 14. Abrasive grain size: 30#'"' 320# 15. Particle size of abrasive: ~25kg 16. Grinding fluid reserves: 50L 18. Machine customizable items: manual/electric cart, manual/ electric turntable Tb WN6060 13.Abrasive types: Corundum abrasives are recommended, and other abrasives are also permitted 14. Abrasive grain size: 30# ~ 320# 15. Particle size of abrasive: ~15kg 16. Grinding fluid reserves: 35 L 17. water: Tap water for industrial use 18. Machine customizable items: manual/electric cart, manual/ electric turntable 6. Opening mode: Side door 11. Compressed air source pressure : 5—8 bar(kg/cm2) 12. Compressed air source gas volume: 0.8—1.5m3/min Tb WN9090 Specification: 1 .Product number: Tb-WN9090 2.Size (L/W/H): 1590*975*1750mm 3.Working warehouse size: 900*900 *7 OOmm 6. Opening mode: Side door lO.Machine lights: 220V, 2*12W , LED 11 .Compressed air source pressure: 5—8 bar(kg/cm2) 12. Compressed air source gas volume: 0.8—1.5m3/min 13.Abrasive types: Corundum abrasives are recommended, and other abrasives are also permitted 16. Grinding fluid reserves: 42L 17. water : Tap water for industrial use 18.Machine customizable items: manual/electric cart, manual/ electric turntable Zhejiang TongBao Surface Equipment Technology Co.,LTD. ADD: NO.359 Zhenye Road TongXiang City Zhejiang Province China • TEL: (86)57388361168 • E-mail: [email protected] 04

Open the catalog to page 1

All Tongbao Surface Processing Equipment catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list