SLS Rodless SCREW DRIVE ACTUATOR LINEAR SOLUTIONS MADE EASY LINEAR SOLUTIONS MADE EASY

SLS rodless screw Drive Actuator Look for this endurance technology symbol indicating our durability design features This rodless style actuator is designed for carrying light to moderate loads on a wide, rigid base. Based upon our LS pneumatic linear slide, it utilizes a guidance system consisting of two linear guide rods with recirculating ball bearings for stable, smooth and low friction operation. Built-toorder in stroke lengths up to 120 inches with multiple screw options available. LOAD-BEARING CARRIER DESIGN • Four recirculating ball bearings provide guidance, low friction loss and long...

TolOMatic… Linear solutions made easy EXTERNAL BUMPERS • Bumpers protect the screw and nut assembly from damage at end of stroke YOUR MOTOR HERE ■ Motor or gearbox supplied and T-SLOT MOUNTING Lightweight aluminum design • Black anodized extrusion design is optimized for rigidity and strength • External switch channels on both sides allow easy placement and adjustment of position indicating switches •Actuator base has two T-Slot channels running the entire length for secure mounting • Table includes two T-Slot channels for easy attachment of any load installed by Tolomatic ■ pecify the device...

SLS10 Rodless Screw Drive Actuator ACME SCREW SPECIFICATIONS SLS/MLS10 ACME SCREW CRITICAL SPEED AND PV LIMITS SLS10 Critical Speed for .5 ACME, all TPI SLS10 Critical Speed for 12mm ACME, 12 and 25 LEADS CRITICAL SPEED WITH 1/2" US CONVENTIONAL ACME SCREW SPEED (mm/sec) MLS10 12mm 25mm Lead ACME Screw LEAD PV LIMITS: 12mm ACME METRIC SCREW w/25mm PV Limits 1/2" 1TPI ACME Screw PV Limits PV LIMITS: 1/2" 1 TPI US CONVENTIONAL ACME SCREW 180 170 160 MAXIMUM STROKE MAXIMUM STROKE SPEED (in/sec) MAXIMUM STROKE CRITICAL SPEED WITH 12mm METRIC ACME SCREW MAXIMUM STROKE MAXIMUM STROKE SPEED (mm/sec)...

SLS10 Rodless Screw Drive Actuator BALL SCREW SPECIFICATIONS SLS/MLS10 BALL SCREW SPECIFICATIONS BCS10 Critical Speed for .375 Ball Nut, 8TPI CRITICAL SPEED WITH 10mm METRIC BALL SCREW CRITICAL SPEED WITH 3/8" US CONVENTIONAL BALL SCREW SPEED (mm/sec) SLS10: 3/8" Ball Screw Life Vs. Thrust LIFE CALCULATION: 3/8" 8TPI US CONVENTIONAL BALL SCREW MAXIMUM STROKE MAXIMUM STROKE MAXIMUM STROKE SPEED (in/sec) LIFE CALCULATION: 10mm METRIC BALL SCREW w/3.2mm LEAD 10,000,000 MAXIMUM THRUST* 100,000,000 MAXIMUM THRUST* MAXIMUM THRUST * Maximum thrust reflects 90% reliability for 1 million linear inches...

SLS10 Rodless Screw Drive Actuator SPECIFICATIONS RELATED TO ACTUATOR SIZE AND SCREW SELECTION ACTUATOR SCREW SCREW TPI US CONVENTIONAL LEAD SCREWS ACTUATOR SCREW SCREW LEAD METRIC LEAD SCREWS DESCRIPTION Solid Nut Anti-backlash Solid Nut Ball Nut Low-Backlash Ball Nut Contact Tolomatic for higher accuracy and lower backlash options. * For Acme screws, maximum thrust is the maximum continuous dynamic thrust subject to Thrust x Velocity limitation. For ball screws, maximum thrust reflects 90% reliability for 1 million linear inches of travel. GENERAL ACTUATOR SPECIFICATIONS ACTUATOR CARRIER SERIES...

SLS10 Rodless Screw Drive Actuator FRICTION FORCE LOAD WEIGHT (kgs.) 10 SUPPORT RECOMMENDATIONS DISTANCE BETWEEN SUPPORTS (mm) 100 DISTANCE BETWEEN SUPPORTS (in)

SLS10 Rodless Screw Drive Actuator DYNAMIC BENDING MOMENTS AND LOADS MAXIMUM BENDING MOMENTS AND LOADS STANDARD CARRIER Fz Load (Lateral) AUXILIARY CARRIER: Increases rigidity, load-carrying capacity and moments Breakaway torque will increase when using the Auxiliary carrier option. When ordering, determine your working stroke and enter this value into the configuration string. Overall actuator length will automatically be calculated. *Loads shown in table are at minimum “D” dimension, for ratings with longer “D” dimension see graph below AUXILIARY CARRIER: BENDING MOMENT AT ‘D’ DISTANCE DIMENSION...

SLS10 Rodless Screw Drive Actuator LOAD DEFLECTION X-AXIS DEFLECTION Y-AXIS DEFLECTION Figures calculated with the following considerations: 1.) Tube supports spaced at minimum distances for each bore size 2.) Measurement distance from F to center of carrier is 6 inches MEASUREMENT DISTANCE: 6" Figures calculated with the following considerations: 1.) Tube supports spaced at minimum distances for each bore size 2.) Measurement distance from F to center of carrier is 8 inches DIMENSIONS SLS/MLS10: IN-LINE MOUNT FOR BRUSHLESS MOTORS  AND GEARHEADS For gearhead dimensions and specifications, refer...

SLS10 Rodless Screw Drive Actuator DIMENSIONS S(M)LS MOTOR MOUNTING #10-24 UNC-2B x 0.50 DP [4] (M5 x 0.8 x 12.7 DP) OPTIONAL MOUNTING PLATES Ø .25 (6.4) Ø .281 (7.1) THRU [2] FOR EXTENDED SHAFT CAUTION: DO NOT OVERTIGHTEN SWITCH HARDWARE WHEN INSTALLING NOTE: The scored face of the switch indicates the sensing surface and must face toward the magnet SENSING SURFACE OPTIONAL SWITCH MOUNTING 0.25 (6.4) 0.625 (15.9) 1.00 (25.4) NOTE: Some actuators require switch mounting on a specific side of the actuator. Call Tolomatic 1-800-328-2174 5.50 (139.7) KIT #0610-9010 Mounting Plate KIT #0610-9066...

SLS Rodless Screw Drive Actuator SWITCHES DC REED, AC REED (TRIAC) AND HALL-EFFECT QUICK-DISCONNECT COUPLER - MALE END There are 10 sensing choices: DC reed, form A (open) or form C (open or closed); AC reed (Triac, open); Hall-effect, sourcing, PNP (open); Hall-effect, sinking, NPN (open); each with either flying leads or QD (quick disconnect). Commonly used to send analog signals to PLC (programmable logic controllers), TLL, CMOS circuit or other controller device. These switches are activated by the actuator’s magnet. Switches contain reverse polarity protection. QD cables are shielded; shield...

SLS Rodless Screw Drive Actuator WIRING dIAGRAMS R T & R M dC Reed, FoRM A (+) VoLTAGe deRATING, dC Reed VOLTAGE A.C. or D.C. TeMp. vs CURReNT, AC Reed TeMp. vs CURReNT, dC Reed LOAD CURRENT (mA) INSTALLATIoN INFoRMATIoN C T & C M AC Reed, TRIAC REED SWITCH REED SWITCH LOAD BROWN INPUT TRIAC SWITCH The NoTChed FACe oF The SWITCh INdICATeS The SeNSING SURFACe ANd MUST FACe ToWARd The MAGNeT. B T & B M dC Reed, FoRM C COMMON NORMALLY CLOSED NORMALLY OPEN BROWN BLACK BLUE REED SWITCH T T & T M hALL-eFFeCT, SoURCING, pNp K T & K M hALL-eFFeCT, SINKING, NpN BROWN(+) HALL-EFFECT BLACK SOURCING SWITCH...