SLA Rotary Lobe Pump Application SLA range of rotary lobe pumps combines cost effective simplicity and easy maintenance with TMX quality and reliability. SLA range has been developed for general applications within the Dairy, Beverage, Food, home, chemical and personal care industries. Fully with CIP cleanable. This pump is also perfect for handling any liquid with low or high viscosity. When it comes to filtration and bottling applications. Products containing brittle solids such as curd. Thanks to specially designed lobes, it can be pumped without damage. Easy inspection or replacement without the need for pipework disassembly. SLA pump is a bare shaft rotary lobe pump. It is made of a stainless steel. Pump casing and cover, and two-lobe rotors with sanitary attachment. SLA rotary lobe pump is provided with an internal mechanical seal approved EHEDG. The seal is balanced and has a hygienic design. When required, other materials can be used. SLA pump range is compact, efficient and capable of flow rates up to 122m3/h and pressures up to 12 bar. User Benefits The positive displacement of the Series SLA pump is provided by non-contacting, contra-rotating two or tri-lobe rotors within a fully swept pump chamber. High efficiency Low energy consumption Compact size Smooth flow Reversible operation Low shear pumping Minimal pumped media agitation Easy maintenance Hygienic design

Technical Specifications Operating Limits Operating Data Tri-Lobe max(m³/h ) Bi-Wing max(m³/h ) Tri-Lobe Volume at 100 rpm/lt Bi-Wing Volume at 100 rpm/lt Lobes Type SLA rotary lobe pumps basically consist of two lobe rotors which rotate synchronously inside a casing without touching each other. As the rotors rotate, the spaces between the lobes and the casing are filled with the product, which is transported to the discharge nozzle with a fixed amount of displacement. The pumped fluid forms a continuous stream thanks to the tolerances between the lobes and the pump casing, thus ensuring an efficient...

With geared motor and coupling mounted on stainless steel base frame With bare shafts Rectangular inlet With vertical ports Pressure Relief valve Heating Jackets Positive displacement rotary lobe pumps will continue to build up pressure when operating against a closed valve. Heating jackets are available for all pump sizes. This option makes it possible to heat the pump chamber and to ensure that products which solidify at ambient temperature are kept liquid. With this in mind,it is very important to add in safety device to prevent accidental over-pressurization and subsequent damage to the pump...

Horizontal Configuration Vertical Configuration Horizontal Dimensions TYPE Vertical Dimensions TYPE