SDP İnline Mixer Application The casing is similar to a casing of a centrifugal pump, it houses the stator and the rotor. It is characterised by a high shear due to an adjusted tolerance between the rotor and the stator. The product is suctioned through the inlet and the rotor pushes it to the stator. Passing through the slots of the stator the product is mechanically sheared, the particles are sheared. If the viscosity of the product is higher than 200cP, it is recommended to put an auxiliary. User Benefits The casing is similar to a casing of a centrifugal pump, it houses the stator and the rotor. It is characterised by a high shear due to an adjusted tolerance between the rotor and the stator. The product is suctioned through the inlet and the rotor pushes it to the stator. Passing through the slots of the stator the product is mechanically sheared, the particles are sheared. If the viscosity of the product is higher than 200cP, it is recommended to put an auxiliary. Fast and homogenous powder dissolving A combination of a stationary inline powder-liquid mixer and a pump High dynamic shear, gentle mixing Easy maintenance Reduced installation, emissions, energy and maintenance costs Reduced total cost of ownership combining the functions of Powder mixing and pumping into a single unit

OPTIONS Disintegrating head. Fine screen head. Cooled or pressurised mechanical seal. Connections: DIN 11851, SMS, flanges, etc. Baseplate with antivibration legs. Trolley with/without control panel. Mirror polish Ra < 0.5 μm for the pharmaceutical applications. Other motor protections. Dimensions TYPE Capacity TYPE